Vinyl single wash station — 3D-printable model preview

AR view

Music & audio Medium

Vinyl single wash station

Wash and rinse 7-inch singles on edge in two baths

A two-bath wash station for 7-inch singles. The record stands on edge in the wash bath and is turned by hand through the cleaning fluid, then moved to the rinse bath beside it. The label stays above the liquid, and decades of crackle wash away. WASH and RINSE are raised on the front.

Customize this model

Size (Base A): 196 × 34 × 110 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 32.3 cm³
Est. weight (PLA): 40.1 g
Parts to print: 1
Category: Music & audio
Made by: Krypto
Built in: 25 steps

What’s in it

Rectangular, 196 × 34 × 110 mm, with 2.4 mm walls
Raised text: “WASH”
One more base built on (Base B)
Base B: rectangular, 196 × 34 mm, 100 mm tall (beside)

How to print it

Cover the labels with a label protector; fill the wash bath with record cleaner and the rinse with distilled water.

Prints as shown on its floor, no supports.

Filament: at most about 40.1 g of PLA printed solid (roughly $0.80 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the vinyl single wash station model?

The vinyl single wash station model measures 196 × 34 × 110 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Cover the labels with a label protector; fill the wash bath with record cleaner and the rinse with distilled water. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 40.1 g of PLA (32.3 cm³ printed solid), roughly $0.80 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More music & audio

Elastic hair-tie guitar capo

Make a spare capo from a hair tie

Simple

Cello endpin stopper

Keep a cello or bass endpin from slipping

Guitar neck rest cradle

Support a guitar neck during maintenance

Simple

Guitar string action gauge

Check guitar string action

Simple

Piano-key pen tray

Keep a pen in each key of a piano octave

Advanced

Ocean-wave drum

Tilt a sealed drum of beads slowly to hear surf breaking on a beach

Multi-part assembly

Conductor's baton case

Protect a conductor's baton in a music bag

Multi-part assembly

See all 48 in Music & audio

Make it fit your space

Change the size, walls, dividers, holes and labels of the vinyl single wash station model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model