Conductor's baton case — 3D-printable model preview

AR view

Music & audio Multi-part assembly

Conductor's baton case

Protect a conductor's baton in a music bag

A slim hard case for a conductor's baton, which snaps easily in a bag of scores. The cork handle sits in the wide end, the shaft runs down the narrow channel, and the telescoping lid slides on. BATON is engraved along the top.

Customize this model

Size: 300 × 34 × 30 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 86.1 cm³
Est. weight (PLA): 107 g
Parts to print: 2
Category: Music & audio
Made by: Krypto
Built in: 21 steps

What’s in it

Rectangular, 300 × 34 × 30 mm, with 2.0 mm walls
Engraved text: “BATON”
Telescoping lid (prints separately)

How to print it

Fits batons up to 290 mm with a 22 mm handle; print lying flat.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 107 g of PLA printed solid (roughly $2.13 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the conductor's baton case model?

The conductor's baton case model measures 300 × 34 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Fits batons up to 290 mm with a 22 mm handle; print lying flat. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 107 g of PLA (86.1 cm³ printed solid), roughly $2.13 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More music & audio

Elastic hair-tie guitar capo

Make a spare capo from a hair tie

Simple

Cello endpin stopper

Keep a cello or bass endpin from slipping

Guitar neck rest cradle

Support a guitar neck during maintenance

Simple

Guitar string action gauge

Check guitar string action

Simple

Brass player's care caddy

Keep valve oil, slide grease and the mouthpiece in one caddy

Medium

Piano-key pen tray

Keep a pen in each key of a piano octave

Advanced

Vinyl single wash station

Wash and rinse 7-inch singles on edge in two baths

Medium

See all 48 in Music & audio

Make it fit your space

Change the size, walls, dividers, holes and labels of the conductor's baton case model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model