Models Showcase: free 3D-printable organizers

By Krypto

Complexity

Medium

Desk & office Desk organisation

0

MAIN PURPOSE: Plan the day hour by hour with tokens

A clock face you plan with: each of the twelve wedges is one hour of the working day, and you drop a paper clip, coloured token or folded note into the hours you have promised to something. One look shows how full the day is, and emptying a wedge feels better than ticking a list. Waiting tokens sit in the hub.

Printing notes

99.1 cm³

Volume

122.9 g

Est. weight

11,744

Triangles

Print flat in two colours if you can. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Desk & office Desk organisation

0

Pivot Drawer

MAIN PURPOSE: Add a swing-out drawer under any desk

A pencil tray that screws under the desk top through its corner post and swings out on that single screw: push it back and it disappears under the edge, pull the finger notch and pens, cables and the stapler swing out to you. The post is 2 mm taller than the walls so the rim never rubs the desk.

Printing notes

72.1 cm³

Volume

89.5 g

Est. weight

2,588

Triangles

Print in PETG; one 4.5 mm wood screw and a washer. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Multi-part assembly

Desk & office Desk organisation

0

Kaidan Chest

MAIN PURPOSE: Store desk things in a stepped drawer chest

A desk-size kaidan dansu, the Japanese staircase chest: a three-drawer tower with ring pulls steps down to a 70 mm open tray beside it. Small things go in the drawers, the tray takes the keys and phone, and the stepped silhouette looks like furniture, not plastic.

Printing notes

325.1 cm³

Volume

403.2 g

Est. weight

668

Triangles

Print drawers in a darker colour for the kaidan look. Prints as shown on its floor, no supports. The 3 drawers print separately from the case.

AR view Open in app

By Krypto

Complexity

Simple

Desk & office Desk organisation

0

Locktile Cup

MAIN PURPOSE: Lock pen cups together in any arrangement

The tall member of the Locktile system: a pen or brush cup with the same jigsaw outline, so cups lock to each other and into a field of Locktile Trivet tiles. Build a honeycomb desk caddy that lifts as one piece, then unclip a cup to carry it away.

Printing notes

115.6 cm³

Volume

143.3 g

Est. weight

3,164

Triangles

Print upright; tabs come out hollow. Prints as shown on its outline, no supports.

AR view Open in app

By Krypto

Complexity

Multi-part assembly

Desk & office Desk organisation

0

Lodestone Drawer

MAIN PURPOSE: Add a drawer module to a magnetic cube layout

A 60 mm cube with a knob drawer and magnets on its sides and back, so a drawer can sit anywhere in a Lodestone layout: under a cup, beside a tray or as a tower of three. Holds SD cards, earbuds tips or staples.

Printing notes

79.8 cm³

Volume

98.9 g

Est. weight

1,272

Triangles

Twelve 6 x 3 mm magnets, same polarity rule. Prints as shown on its floor, no supports. The drawer prints separately from the case.

AR view Open in app

By Krypto

Complexity

Medium

Desk & office Desk organisation

0

Lodestone Slot

MAIN PURPOSE: Stand a phone or cards upright in a cube layout

A Lodestone cube with a lowered front and a 14 mm slot at the back that stands a phone, a notebook or a stack of cards upright. Its side and back magnets hold it in a row, so a charging spot can move round the desk with the rest.

Printing notes

27.1 cm³

Volume

33.6 g

Est. weight

1,128

Triangles

Twelve 6 x 3 mm magnets. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Simple (set)

Desk & office Desk organisation

0

Carriage Track

MAIN PURPOSE: Hold sliding desk modules in a captive rail

A desk rail that carriages ride in: a 240 mm channel open at both ends with an inward ledge along each long wall. Carriage pieces slide in from an end with their flanges under the ledges, so they glide along to wherever you want them but cannot tip out or be knocked off.

Printing notes

56.0 cm³

Volume

69.5 g

Est. weight

120

Triangles

Print two and butt them end to end for a longer run. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Advanced

Desk & office Desk organisation

0

Carriage Quiver

MAIN PURPOSE: Slide a pen cup along a desk rail

A tall pen cup that rides in the Carriage Track: low flanges at the foot slide under the track ledges, so the cup glides along the rail and stays upright even when pens are snatched out in a hurry.

Printing notes

9.7 cm³

Volume

12.0 g

Est. weight

324

Triangles

Print upright. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Advanced

Desk & office Desk organisation

0

Carriage Deck

MAIN PURPOSE: Slide a phone slot and tray along a desk rail

A wide carriage for the Carriage Track: a front bay for earbuds or cards and a 14 mm rear slot that stands a phone upright, riding on flanges under the track ledges. Slide it to whichever end of the desk you are working at.

Printing notes

23.3 cm³

Volume

28.8 g

Est. weight

336

Triangles

Print upright. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Medium

Desk & office Desk organisation

0

Golden Angle

MAIN PURPOSE: Hold pens of eight sizes apart on a phyllotaxis spiral

A pen pot whose top is a sunflower head: eight holes spiral out at 137.5 degrees, the angle plants use to pack seeds without gaps, and they grow from 7 mm for fine liners to 16 mm for brushes. Every pen gets its own hole, so tips never clash and the mix of sizes still packs tightly. Print it as shown, then turn it over so the floor becomes the top.

Printing notes

78.6 cm³

Volume

97.5 g

Est. weight

2,008

Triangles

Prints in one piece; the pens rest on the desk inside. Print floor-down as shown, then turn it over to use it.

AR view Open in app