Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Vaze Knurl Bottle
By Alpha
Complexity
Medium
Bedroom & bathroom Others Geometric & decorative
0
Vaze Knurl Bottle
MAIN PURPOSE: Display dried flowers or a single stem
A small bottle vase with a round belly, a narrower neck and a gently flared lip, covered in a crisp diamond knurl. About 110 mm across and 100 mm tall, it reads like a classic cut-glass bottle.
Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.
Printing notes
112.8 cm³
Volume
139.9 g
Est. weight
430,500
Triangles

Silk or dual-colour PLA makes the diamonds sparkle. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Knurl Dish
By Alpha
Complexity
Medium
Desk & office Bedroom & bathroom Others Geometric & decorative
0
Vaze Knurl Dish
MAIN PURPOSE: Catch keys, rings and small trinkets
A low dish that swells out at the middle like a spun bowl, covered in a crisp diamond knurl that catches the light from every side. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.
Prints in one piece with no supports. Change the size, the curve or the diamond size in the editor to make your own.
Printing notes
48.8 cm³
Volume
60.5 g
Est. weight
132,004
Triangles

Silk or matte PLA both show the diamonds well. 3 walls keep the knurl solid. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Swirl Gourd Vase
By Alpha
Complexity
Medium (set)
Bedroom & bathroom Others Geometric & decorative
1
Vaze Swirl Gourd Vase
MAIN PURPOSE: Display a single stem or dried flowers
A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped in sharp pleats that twist 45° around it. The pleats are deepest at the belly and fade away up the neck, so the swirl looks like it's spinning upward. About 110 mm across the pleats and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.
Printing notes
181.9 cm³
Volume
225.5 g
Est. weight
105,380
Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. Silk or dual-colour PLA makes the twist stand out. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Swirl Bottle
By Alpha
Complexity
Medium
Bedroom & bathroom Others Geometric & decorative
1
Vaze Swirl Bottle
MAIN PURPOSE: Display dried flowers or a single stem
A small bottle vase with a round belly and a narrow neck, wrapped in sharp pleats that twist 45° around it. The pleats are deepest at the belly and thin out towards the neck, so it reads like a classic bottle with a swirl. About 110 mm across the pleats and 100 mm tall.

Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.
Printing notes
181.2 cm³
Volume
224.7 g
Est. weight
21,080
Triangles

Silk or dual-colour PLA makes the twist stand out. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Vaze Swirl Dish
By Alpha
Complexity
Medium
Desk & office Bedroom & bathroom Others Geometric & decorative
0
Vaze Swirl Dish
MAIN PURPOSE: Catch keys, rings and small trinkets
A low dish wrapped in sharp pleats that twist 45° around it, swelling out at the middle like a spun bowl. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.

Prints in one piece with no supports. Change the size, the pleat depth or the twist in the editor to make your own.
Printing notes
53.7 cm³
Volume
66.6 g
Est. weight
21,056
Triangles

Silk or dual-colour PLA makes the twist stand out; 3 walls keep the pleats solid. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Tissue in-and-out box
By Krypto
Complexity
Multi-part assembly
Bedroom & bathroom Health & medicine
0
Tissue in-and-out box
MAIN PURPOSE: Pull clean tissues from the top and post used ones into a flap bin on the side
Every cold ends with a mountain of used tissues on the bedside table. This box solves both halves of the problem: clean tissues pull out of the slot in the top, and used ones go straight through the swinging flap of the bin built onto its side, out of sight. The bin lid lifts off for emptying. CLEAN and USED are raised on the fronts, so nobody gets them mixed up at 3 a.m.
Printing notes
170.1 cm³
Volume
210.9 g
Est. weight
12,420
Triangles

Drop a folded stack of tissues into the main box under the slotted top; the bin flap swings in and the bin's lid lifts off to empty. Prints as shown on its floor, no supports. The added base's lid prints separately. Stacked parts are fused into one print.

AR view Open in app
Preview of Bottomless infinity ring dish
By Krypto
Complexity
Simple
Bedroom & bathroom Jewellery & grooming
0
Bottomless infinity ring dish
MAIN PURPOSE: Rest rings over a glowing tunnel of lights that seems to go down forever
Drop your rings on this dish and they seem to hover over a tunnel of lights falling away into the table. The floor holds a mirror, a strip of LEDs runs round the walls, and the dish surface is a one-way mirror resting on the ledge: light bounces back and forth between the two mirrors, and each bounce looks deeper. Switch it on at night and it becomes a bedside light too; switch it off and it is a plain mirror dish.
Printing notes
35.0 cm³
Volume
43.4 g
Est. weight
3,140
Triangles

Stick a mirror tile on the floor, run a battery LED strip round the walls below the ledge, and lay a one-way-mirror acrylic sheet on the ledge. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Submarine bath-tea infuser
By Krypto
Complexity
Multi-part assembly
Bedroom & bathroom Bath & body care
0
Submarine bath-tea infuser
MAIN PURPOSE: Hang a pierced submarine of bath herbs under the hot tap
Bath tea is a pot of herbs for the bath, and this one is a little submarine. Fill the hull with oats, lavender, rose petals or chamomile, close the hatch and hang it by the ring on its conning tower under the hot tap: the water pours in through the hatch rim and out through the eight holes in the hull, smelling of the herbs, without a single petal in the bath. When the bath is full, unhook it and let it dive to the bottom to keep steeping.
Printing notes
100.5 cm³
Volume
124.6 g
Est. weight
4,360
Triangles

PETG. Fill with oats, lavender, chamomile or rose petals; hang it from the tap by the ring on its tower while the bath runs. Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app
Preview of Shower-thoughts idea pod
By Krypto
Complexity
Medium
Bedroom & bathroom Bath & body care
0
Shower-thoughts idea pod
MAIN PURPOSE: Catch the ideas you have in the shower on a waterproof pad before they vanish
Your best ideas arrive in the shower, and are gone by the time you are dry. This wall pod holds a waterproof notepad behind a big window you can write through, a pencil in its own tube, and drain holes so nothing pools. Write the idea down mid-rinse, tear off the sheet later. SHOWER THOUGHTS is raised above the window.
Printing notes
45.8 cm³
Volume
56.8 g
Est. weight
13,216
Triangles

PETG. Fits a waterproof A6 notepad (or a slate of white plastic and a grease pencil). Screw it up through the keyholes. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Open love-lock ring box
By Krypto
Complexity
Simple
Bedroom & bathroom Jewellery & grooming
0
Open love-lock ring box
MAIN PURPOSE: Present a ring in an open padlock waiting to be locked
Couples lock padlocks onto bridges to seal a promise. This ring box is a love-lock caught open, its shackle lifted, waiting for the answer. The ring sits in the lock body, and when the answer is yes, the lock is closed. It is a proposal box with a story to tell.
Printing notes
68.8 cm³
Volume
85.3 g
Est. weight
1,508
Triangles

Print in gold or rose; engrave initials with a marker or a rotary tool on the body. Prints as shown on its outline, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan