Submarine bath-tea infuser — 3D-printable model preview

AR view

Bath & body care Multi-part assembly

Submarine bath-tea infuser

Hang a pierced submarine of bath herbs under the hot tap

Bath tea is a pot of herbs for the bath, and this one is a little submarine. Fill the hull with oats, lavender, rose petals or chamomile, close the hatch and hang it by the ring on its conning tower under the hot tap: the water pours in through the hatch rim and out through the eight holes in the hull, smelling of the herbs, without a single petal in the bath. When the bath is full, unhook it and let it dive to the bottom to keep steeping.

Customize this model

Size: 150 × 60 × 55 mm
Shape: Capsule
Walls: 2.0 mm
Volume: 100 cm³
Est. weight (PLA): 125 g
Parts to print: 3
Category: Bath & body care
Made by: Krypto
Built in: 48 steps

What’s in it

Capsule, 150 × 60 × 55 mm, with 2.0 mm walls
8 holes in the floor
Friction-fit lid (prints separately)

How to print it

PETG. Fill with oats, lavender, chamomile or rose petals; hang it from the tap by the ring on its tower while the bath runs.

Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 125 g of PLA printed solid (roughly $2.49 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the submarine bath-tea infuser model?

The submarine bath-tea infuser model measures 150 × 60 × 55 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG. Fill with oats, lavender, chamomile or rose petals; hang it from the tap by the ring on its tower while the bath runs. Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 125 g of PLA (100 cm³ printed solid), roughly $2.49 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More bath & body care

Aligner soak basket with lift tab

Soak aligners and lift them out hands-free

Advanced

Shower head descaling soak cup

Descale a fixed shower head without removing it

Simple

Barbed drain hair hook strip

Pull hair clogs out of basin drains

Simple

Pedicure toe separators

Keep toes apart while painting toenails

Simple (set)

Reed diffuser vessel

Scent a room with reeds

Medium

Shower-thoughts idea pod

Catch the ideas you have in the shower on a waterproof pad before they vanish

Medium

Shower squeegee holster

Hang a shower squeegee blade-down to drip dry

Medium

Drip Tip

Keep a soap bar dry and drain it off a leaf tip

Medium

See all 51 in Bath & body care

Make it fit your space

Change the size, walls, dividers, holes and labels of the submarine bath-tea infuser model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model