Tissue in-and-out box — 3D-printable model preview

AR view

Health & medicine Multi-part assembly

Tissue in-and-out box

Pull clean tissues from the top and post used ones into a flap bin on the side

Every cold ends with a mountain of used tissues on the bedside table. This box solves both halves of the problem: clean tissues pull out of the slot in the top, and used ones go straight through the swinging flap of the bin built onto its side, out of sight. The bin lid lifts off for emptying. CLEAN and USED are raised on the fronts, so nobody gets them mixed up at 3 a.m.

Customize this model

Size (Base A): 130 × 130 × 120 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 170 cm³
Est. weight (PLA): 211 g
Parts to print: 2
Category: Health & medicine
Made by: Krypto
Built in: 43 steps

What’s in it

Rectangular, 130 × 130 × 120 mm, with 2.4 mm walls
1 hole in the floor
Raised text: “CLEAN”, “USED”
2 more bases built on (Bases B–C)
Base B: rectangular, 130 × 130 mm, 6 mm tall (stacked)
Base C: rectangular, 90 × 130 mm, 100 mm tall (beside)

How to print it

Drop a folded stack of tissues into the main box under the slotted top; the bin flap swings in and the bin's lid lifts off to empty.

Prints as shown on its floor, no supports. The added base's lid prints separately. Stacked parts are fused into one print.

Filament: at most about 211 g of PLA printed solid (roughly $4.22 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the tissue in-and-out box model?

The tissue in-and-out box model measures 130 × 130 × 120 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Drop a folded stack of tissues into the main box under the slotted top; the bin flap swings in and the bin's lid lifts off to empty. Prints as shown on its floor, no supports. The added base's lid prints separately. Stacked parts are fused into one print.

How much filament does it use?

At most about 211 g of PLA (170 cm³ printed solid), roughly $4.22 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More health & medicine

CPAP hose drip-dry hanger

Dry a washed CPAP hose without kinks

Simple

Wall finger ladder for shoulder exercises

Track shoulder stretching range on the wall

Advanced

Insulin injection site rotation template

Rotate injection sites evenly round the navel

Advanced

Eye drop aiming guide

Put in eye drops accurately

Medium

Graded hand therapy peg board

Practise pinch grip with graded pegs

Advanced

Mirror-therapy box

Trick the brain with a mirror for phantom-limb pain and stroke recovery

Medium

Box-breathing finger tracer

Trace a square track with a fingertip to pace box breathing

Simple

Inhaler and spacer station

Keep a child's inhalers and spacer ready on the wall

Medium

See all 28 in Health & medicine

Make it fit your space

Change the size, walls, dividers, holes and labels of the tissue in-and-out box model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model