Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Shop rag dispenser
By Krypto
Complexity
Multi-part assembly
Workshop Workshop storage
0
Shop rag dispenser
MAIN PURPOSE: Dispense shop rags from a wall box
A wall-mounted rag box: stuff rags in at the top and pull them out through the round opening, with RAGS on the front.
Printing notes
421.5 cm³
Volume
522.6 g
Est. weight
7,620
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. The lid prints as a separate part, top down.

AR view Open in app
Preview of Solder spool dispenser
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Solder spool dispenser
MAIN PURPOSE: Feed solder wire from its spool
A round canister the solder spool turns inside, feeding the wire out through a small hole in the fitted top, on round feet.
Printing notes
63.1 cm³
Volume
78.3 g
Est. weight
1,720
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Filament swatch slot rack
By Krypto
Complexity
Advanced
Workshop Maker & 3D printing
0
Filament swatch slot rack
MAIN PURPOSE: Sort filament colour swatches upright
Nine slots that keep 3D printing filament swatches upright and easy to flick through, with a label slot.
Printing notes
80.2 cm³
Volume
99.5 g
Est. weight
3,048
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Bike torque wrench case
By Krypto
Complexity
Multi-part assembly
Workshop Car & bike
0
Bike torque wrench case
MAIN PURPOSE: Store a compact bicycle torque wrench
A long fitted case for a compact bicycle torque wrench, with a telescoping lid shown beside it.
Printing notes
374.7 cm³
Volume
464.6 g
Est. weight
5,620
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Ratchet and socket fitted tray
By Krypto
Complexity
Simple
Workshop Tools & jigs
0
Ratchet and socket fitted tray
MAIN PURPOSE: Organise a ratchet and sockets
A shadow tray with a ratchet-shaped recess and a row of four sockets in rising sizes.
Printing notes
272.0 cm³
Volume
337.3 g
Est. weight
2,716
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Wall spray bottle caddy
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Wall spray bottle caddy
MAIN PURPOSE: Hang spray bottles trigger-ready on the wall
Three bays for spray bottles with a low front so the triggers are easy to grab, mounted with keyholes.
Printing notes
141.2 cm³
Volume
175.1 g
Est. weight
1,520
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Gridfinity 1x3 scoop bin with label
By Krypto
Complexity
Simple
Workshop Gridfinity system
0
Gridfinity 1x3 scoop bin with label
MAIN PURPOSE: Store small parts in a Gridfinity bin
A long Gridfinity bin with a scooped front edge for small parts and a label slot.
Printing notes
35.2 cm³
Volume
43.6 g
Est. weight
2,254
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Bench dustpan for sawdust
By Krypto
Complexity
Simple
Workshop Woodworking
0
Bench dustpan for sawdust
MAIN PURPOSE: Sweep sawdust off the workbench
A bench dustpan with an open front to sweep into, filleted inner corners and a hanging slot in the back.
Printing notes
112.5 cm³
Volume
139.6 g
Est. weight
1,260
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Automotive blade fuse kit
By Krypto
Complexity
Multi-part assembly
Workshop Car & bike
0
Automotive blade fuse kit
MAIN PURPOSE: Store spare car blade fuses
Twelve small cells for blade fuses by rating, with a flat lid and ring pull for the glovebox.
Printing notes
96.6 cm³
Volume
119.8 g
Est. weight
3,408
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Whetstone drip tray
By Krypto
Complexity
Simple
Workshop Tools & jigs
0
Whetstone drip tray
MAIN PURPOSE: Catch slurry under a whetstone
The stone sits inside an inner wall while water and slurry run off into the channel around it, on small feet.
Printing notes
95.4 cm³
Volume
118.3 g
Est. weight
2,352
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan