Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Tealight cup refill tray
By Krypto
Complexity
Advanced
Others Sustainable living
0
Tealight cup refill tray
MAIN PURPOSE: Refill used tealight cups with leftover wax
Holds eight empty aluminium tealight cups level and upright while you refill them: drop in a wick on its sustainer, pour wax melted from old candle ends, and the cups get a second life instead of going in the bin.
Printing notes
59.5 cm³
Volume
73.8 g
Est. weight
2,348
Triangles

Print in PETG and pour the wax at 70 C or below. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Reusable bag drying pegs
By Krypto
Complexity
Advanced
Others Sustainable living
0
Reusable bag drying pegs
MAIN PURPOSE: Dry washed reusable bags open
Turn washed zip bags, produce bags and bread bags inside out and slip each over a peg: five staggered pegs of different heights hold them open so air reaches the inside, and they dry in hours instead of staying damp in a drawer.
Printing notes
128.2 cm³
Volume
158.9 g
Est. weight
5,204
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Charger cable strain-relief splint
By Krypto
Complexity
Simple (set)
Others Sustainable living
0
Charger cable strain-relief splint
MAIN PURPOSE: Stop charger cables fraying at the plug
Snap it over a charger or headphone cable where it starts to fray at the plug: the 30 mm sleeve stops the sharp bend that breaks the wires, so a tiny repair keeps the cable out of the e-waste bin for years.
Printing notes
2.8 cm³
Volume
3.4 g
Est. weight
792
Triangles

Print in TPU; print a few. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Seed bomb cube mould
By Krypto
Complexity
Advanced
Others Sustainable living
0
Seed bomb cube mould
MAIN PURPOSE: Make wildflower seed bombs
Press a mix of clay, compost and wildflower seeds into the twelve cells, let them dry and pop them out; throw the seed bombs onto bare ground for a patch of flowers.
Printing notes
83.3 cm³
Volume
103.3 g
Est. weight
1,724
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Grocery bag dispenser
By Krypto
Complexity
Simple
Others Sustainable living
0
Grocery bag dispenser
MAIN PURPOSE: Store and reuse carrier bags
Stuff used carrier bags in at the top and pull them out one at a time from the opening at the bottom; it hangs on the wall or inside a cupboard door from the two keyholes.
Printing notes
39.4 cm³
Volume
48.9 g
Est. weight
2,168
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Outdoor dome litter bin
By Krypto
Complexity
Multi-part assembly
Others Sustainable living
0
Outdoor dome litter bin
MAIN PURPOSE: Collect litter in an outdoor bin
A tall litter bin with an open dome top and LITTER on the back.
Printing notes
391.3 cm³
Volume
485.2 g
Est. weight
1,012
Triangles

Prints as shown on its floor, no supports. Print the hood upside down, roof on the plate.

AR view Open in app
Preview of Countertop compost caddy
By Krypto
Complexity
Multi-part assembly
Kitchen Sustainable living
0
Countertop compost caddy
MAIN PURPOSE: Collect kitchen scraps for composting
A kitchen scrap bin with a swing lid: push the flap to drop peelings in and it falls shut.
Printing notes
240.2 cm³
Volume
297.9 g
Est. weight
6,012
Triangles

Prints as shown on its floor, no supports. Print the hood upside down, roof on the plate.

AR view Open in app
Preview of Kitchen recycling sorter
By Krypto
Complexity
Multi-part assembly
Kitchen Sustainable living
0
Kitchen recycling sorter
MAIN PURPOSE: Sort cans and plastics for recycling
A two-compartment recycling bin with an open dome top: cans one side, plastics the other.
Printing notes
417.1 cm³
Volume
517.2 g
Est. weight
336
Triangles

Prints as shown on its floor, no supports. Print the hood upside down, roof on the plate.

AR view Open in app
Preview of Paper recycling bin
By Krypto
Complexity
Multi-part assembly
Desk & office Sustainable living
0
Paper recycling bin
MAIN PURPOSE: Collect waste paper for recycling
A tall office recycling bin with an open dome top and PAPER on the back.
Printing notes
248.5 cm³
Volume
308.1 g
Est. weight
1,936
Triangles

Prints as shown on its floor, no supports. Print the hood upside down, roof on the plate.

AR view Open in app
Preview of Battery recycling bin
By Krypto
Complexity
Multi-part assembly
Others Sustainable living
0
Battery recycling bin
MAIN PURPOSE: Collect used batteries for recycling
A small dome-topped bin for used batteries, with BATTERIES on the back.
Printing notes
94.6 cm³
Volume
117.3 g
Est. weight
4,204
Triangles

Prints as shown on its floor, no supports. Print the hood upside down, roof on the plate.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan