Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Drum practice pad base
By Krypto
Complexity
Advanced
Others Music & audio
0
Drum practice pad base
MAIN PURPOSE: Practise drumming quietly
Glue a 6 mm gum-rubber or neoprene disc into the 4 mm recess and you have a quiet, bouncy practice pad: the eight-spoke body stays rigid under rimshots and the grip feet hold it on a table, a knee or a snare stand basket.
Printing notes
404.2 cm³
Volume
501.2 g
Est. weight
2,552
Triangles

PLA or PETG; add a 200 mm gum-rubber disc. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Elastic hair-tie guitar capo
By Krypto
Complexity
Simple
Others Music & audio
0
Elastic hair-tie guitar capo
MAIN PURPOSE: Make a spare capo from a hair tie
Press the padded bar across the frets and loop a hair tie from one end notch, under the neck, to the other: a capo that weighs nothing, fits any neck width up to 56 mm and costs pennies, ideal as a spare in every gig bag.
Printing notes
6.9 cm³
Volume
8.6 g
Est. weight
440
Triangles

PETG; add a strip of bike inner tube as the pad. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Cello endpin stopper
By Krypto
Complexity
Medium
Others Music & audio
0
Cello endpin stopper
MAIN PURPOSE: Keep a cello or bass endpin from slipping
Stops a cello or double bass endpin sliding on a wooden or tiled floor: the pin bites into the dotted floor, the grip feet hold the stopper still, and the strap tab ties round a chair leg so it can't creep away.
Printing notes
27.6 cm³
Volume
34.2 g
Est. weight
24,000
Triangles

Print in TPU for the best grip, or PETG with felt pads. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Brass mouthpiece stand
By Krypto
Complexity
Medium
Others Music & audio
0
Brass mouthpiece stand
MAIN PURPOSE: Display and store brass mouthpieces
A stand for three trumpet or cornet mouthpieces: each shank drops into a hole so the cups sit level on the deck, clean and ready to swap between pieces.
Printing notes
26.7 cm³
Volume
33.1 g
Est. weight
7,568
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Ukulele wall hanger
By Krypto
Complexity
Advanced
Others Music & audio
0
Ukulele wall hanger
MAIN PURPOSE: Wall-mount a ukulele
Hangs a ukulele by its headstock: screw the plate to the wall and the neck rests between the two posts with the head behind them. Print it lying flat; once on the wall the posts point straight out.
Printing notes
46.9 cm³
Volume
58.2 g
Est. weight
1,700
Triangles

Print flat in PETG with 4 or more perimeters; screw into a stud or a proper wall plug.

AR view Open in app
Preview of Record label protector
By Krypto
Complexity
Simple (set)
Others Music & audio
0
Record label protector
MAIN PURPOSE: Protect record labels during wet cleaning
Keeps the label dry when you wash a vinyl record: print two, clamp the record between them with a bolt through the spindle hole, and the raised rims seal against the label.
Printing notes
19.2 cm³
Volume
23.8 g
Est. weight
848
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Kazoo with paper membrane
By Krypto
Complexity
Simple
Others Music & audio
0
Kazoo with paper membrane
MAIN PURPOSE: Simple buzzing musical instrument
A square kazoo that really buzzes: stretch baking paper over the round hole with a rubber band, then hum (not blow) into the open end.
Printing notes
2.2 cm³
Volume
2.7 g
Est. weight
2,832
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Reed soaking cup
By Krypto
Complexity
Multi-part assembly
Others Music & audio
0
Reed soaking cup
MAIN PURPOSE: Soak woodwind reeds before playing
Soak clarinet, saxophone or oboe reeds before playing: up to three reeds stand tip-up in their own slots in water, and the screw lid lets you carry the cup in the case.
Printing notes
40.4 cm³
Volume
50.1 g
Est. weight
3,136
Triangles

Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app
Preview of Squircle pop filter frame
By Krypto
Complexity
Medium
Others Music & audio
0
Squircle pop filter frame
MAIN PURPOSE: Cut plosives when recording voice
A pop filter for a home studio: stretch a nylon stocking over the frame, then clamp the tab to the mic stand or a gooseneck so the frame sits a few centimetres in front of the microphone.
Printing notes
26.6 cm³
Volume
33.0 g
Est. weight
1,512
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Guitar neck rest cradle
By Krypto
Complexity
Simple
Others Music & audio
0
Guitar neck rest cradle
MAIN PURPOSE: Support a guitar neck during maintenance
Supports a guitar neck while you restring, clean the fretboard or adjust the truss rod; stick felt or foam into the cradle so it never marks the finish.
Printing notes
92.0 cm³
Volume
114.1 g
Est. weight
1,032
Triangles

Print as it comes, side outline on the bed.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan