Display and store brass mouthpieces
A stand for three trumpet or cornet mouthpieces: each shank drops into a hole so the cups sit level on the deck, clean and ready to swap between pieces.
Prints as shown on its floor, no supports. Stacked parts are fused into one print.
Filament: at most about 33.1 g of PLA printed solid (roughly $0.66 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The brass mouthpiece stand model measures 120 × 50 × 55 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. Stacked parts are fused into one print.
At most about 33.1 g of PLA (26.7 cm³ printed solid), roughly $0.66 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the brass mouthpiece stand model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.