Practise drumming quietly
Glue a 6 mm gum-rubber or neoprene disc into the 4 mm recess and you have a quiet, bouncy practice pad: the eight-spoke body stays rigid under rimshots and the grip feet hold it on a table, a knee or a snare stand basket.
PLA or PETG; add a 200 mm gum-rubber disc.
Prints as shown on its floor, no supports. Stacked parts are fused into one print.
Filament: at most about 501 g of PLA printed solid (roughly $10.02 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The drum practice pad base model measures Ø 220 mm, 20 mm tall. That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.
No. PLA or PETG; add a 200 mm gum-rubber disc. Prints as shown on its floor, no supports. Stacked parts are fused into one print.
At most about 501 g of PLA (404 cm³ printed solid), roughly $10.02 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the drum practice pad base model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.