Guitar soundhole humidifier pod — 3D-printable model preview

AR view

Music & audio Medium

Guitar soundhole humidifier pod

Humidify an acoustic guitar from inside

Fill the slotted pod with a damp sponge and hang it in the sound hole from the 120 mm bar, slid under the strings: the guitar breathes moisture from inside, where it matters, so the top does not crack and the frets do not stick out in dry winter air.

Customize this model

Size (Base A): 70 × 22 × 34 mm
Shape: Rectangular
Walls: 1.6 mm
Volume: 5.1 cm³
Est. weight (PLA): 6.3 g
Parts to print: 1
Category: Music & audio
Made by: Krypto
Built in: 27 steps

What’s in it

Rectangular, 70 × 22 × 34 mm, with 1.6 mm walls
2 patterned wall panels (cut-out)
One more base built on (Base B)
Base B: rectangular, 120 × 10 mm (stacked)

How to print it

PETG.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 6.3 g of PLA printed solid (roughly $0.13 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the guitar soundhole humidifier pod model?

The guitar soundhole humidifier pod model measures 70 × 22 × 34 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 6.3 g of PLA (5.1 cm³ printed solid), roughly $0.13 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More music & audio

Elastic hair-tie guitar capo

Make a spare capo from a hair tie

Simple

Cello endpin stopper

Keep a cello or bass endpin from slipping

Guitar neck rest cradle

Support a guitar neck during maintenance

Simple

Guitar string action gauge

Check guitar string action

Simple

Music stand page clip

Hold sheet music open on a stand outdoors

Simple (set)

Drum practice pad base

Practise drumming quietly

Advanced

Studio monitor tilt wedges

Aim and decouple desktop studio monitors

Simple (set)

See all 48 in Music & audio

Make it fit your space

Change the size, walls, dividers, holes and labels of the guitar soundhole humidifier pod model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model