Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of 2020 extrusion filament guide clip
By Krypto
Complexity
Simple (set)
Workshop Maker & 3D printing
0
2020 extrusion filament guide clip
MAIN PURPOSE: Guide filament past a printer frame
Snaps into the 6 mm slot of any 2020 aluminium frame and holds a 4 mm PTFE tube 18 mm out from the profile: filament from a top or side spool runs through the tube instead of rubbing a groove into the frame edge and dragging against the extruder.
Printing notes
3.3 cm³
Volume
4.1 g
Est. weight
1,152
Triangles

Print in PETG; print a few along the frame. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Bed-levelling knob quarter-turn caps
By Krypto
Complexity
Simple (set)
Workshop Maker & 3D printing
0
Bed-levelling knob quarter-turn caps
MAIN PURPOSE: Track bed-levelling knob turns
Push a cap over each bed-levelling wheel: the four engraved marks show exactly how far you turned each corner, a quarter turn at a time, so an adjustment can be repeated, halved or undone instead of guessed, and the four corners stop chasing each other.
Printing notes
2.5 cm³
Volume
3.1 g
Est. weight
5,134
Triangles

Print four in TPU so they stretch over knurled 30 mm wheels. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Filament spool stand
By Krypto
Complexity
Advanced
Workshop Maker & 3D printing
0
Filament spool stand
MAIN PURPOSE: Feed filament from a spool smoothly
Holds a filament spool next to the printer so it unwinds smoothly: push a 10 mm rod or a broom handle through the spool and rest it in the holes at the top of the two uprights.
Printing notes
47.7 cm³
Volume
59.1 g
Est. weight
3,680
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Filament end clip
By Krypto
Complexity
Simple
Workshop Maker & 3D printing
0
Filament end clip
MAIN PURPOSE: Stop filament ends unwinding
Clips onto the rim of a filament spool and holds the loose end in its notch, so the filament never unravels into a tangle in storage.
Printing notes
1.5 cm³
Volume
1.9 g
Est. weight
520
Triangles

Prints as shown on its outline, no supports.

AR view Open in app
Preview of PTFE tube square-cut guide
By Krypto
Complexity
Medium
Workshop Maker & 3D printing
0
PTFE tube square-cut guide
MAIN PURPOSE: Cut PTFE tube square for 3D printers
Cuts 4 mm PTFE tube perfectly square for a leak-free hotend joint: push the tube through the side holes and press a sharp blade straight down through the slot.
Printing notes
5.4 cm³
Volume
6.7 g
Est. weight
1,352
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Filament dry box
By Krypto
Complexity
Multi-part assembly
Workshop Maker & 3D printing
0
Filament dry box
MAIN PURPOSE: Keep a filament spool dry
A sealed home for one 1 kg filament spool: a ring channel round the edge holds desiccant beads, the telescoping lid closes it up, and a 6 mm port in the side lets the filament feed out through a PTFE tube.
Printing notes
374.3 cm³
Volume
464.2 g
Est. weight
6,484
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of 3D printer purge bin
By Krypto
Complexity
Multi-part assembly
Workshop Maker & 3D printing
0
3D printer purge bin
MAIN PURPOSE: Catch purge waste from a 3D printer
A bin for the purge waste that drops out of a 3D printer's chute: the open mouth of the hooded top faces the printer so the strands fall in and nothing gets swept back out.
Printing notes
120.6 cm³
Volume
149.6 g
Est. weight
5,048
Triangles

Prints as shown on its floor, no supports. Print the hood upside down, roof on the plate.

AR view Open in app
Preview of Filament swatch slot rack
By Krypto
Complexity
Advanced
Workshop Maker & 3D printing
0
Filament swatch slot rack
MAIN PURPOSE: Sort filament colour swatches upright
Nine slots that keep 3D printing filament swatches upright and easy to flick through, with a label slot.
Printing notes
80.2 cm³
Volume
99.5 g
Est. weight
3,048
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Filament desiccant tray
By Krypto
Complexity
Multi-part assembly
Workshop Maker & 3D printing
0
Filament desiccant tray
MAIN PURPOSE: Hold desiccant in a filament dry box
A long vented box for silica gel beads that sits in a filament dry box, with honeycomb vents all round.
Printing notes
68.5 cm³
Volume
84.9 g
Est. weight
6,400
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of 3D printer nozzle stand
By Krypto
Complexity
Advanced
Workshop Maker & 3D printing
0
3D printer nozzle stand
MAIN PURPOSE: Store spare 3D printer nozzles upright
An octagon stand whose top plate holds eight spare nozzles upright, thread down.
Printing notes
45.2 cm³
Volume
56.0 g
Est. weight
1,504
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan