Feed filament from a spool smoothly
Holds a filament spool next to the printer so it unwinds smoothly: push a 10 mm rod or a broom handle through the spool and rest it in the holes at the top of the two uprights.
Prints as shown on its floor, no supports.
Filament: at most about 59.1 g of PLA printed solid (roughly $1.18 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The filament spool stand model measures 120 × 90 × 12 mm (width × depth × height). That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 59.1 g of PLA (47.7 cm³ printed solid), roughly $1.18 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the filament spool stand model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.