Resin strainer funnel for bottle return — 3D-printable model preview

AR view

Maker & 3D printing Medium

Resin strainer funnel for bottle return

Filter resin back into its bottle

Sits in the mouth of a resin bottle and holds a disposable paint strainer cone in its 120 mm bowl: pour the vat back after a print and cured flakes stay in the strainer instead of ruining the next print. The narrow spigot leaves room for air to escape, so the bottle never glugs.

Customize this model

Size (Base A): Ø 26 mm, 18 mm tall
Shape: Round
Walls: 2.0 mm
Volume: 61.7 cm³
Est. weight (PLA): 76.5 g
Parts to print: 1
Category: Maker & 3D printing
Made by: Krypto
Built in: 16 steps

What’s in it

Round, Ø 26 mm, 18 mm tall, with 2.0 mm walls
2 holes in the floor
One more base built on (Base B)
Base B: round, Ø 120 mm, 45 mm tall (stacked)

How to print it

Print in PETG and wear gloves; resin attacks PLA over time.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 76.5 g of PLA printed solid (roughly $1.53 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the resin strainer funnel for bottle return model?

The resin strainer funnel for bottle return model measures Ø 26 mm, 18 mm tall. That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in PETG and wear gloves; resin attacks PLA over time. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 76.5 g of PLA (61.7 cm³ printed solid), roughly $1.53 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More maker & 3d printing

TPU dry-box filament grommet

Feed filament out of a sealed dry box

Medium

Two-handled spool rewinding crank

Rewind filament evenly onto another spool

Medium

2020 extrusion filament guide clip

Guide filament past a printer frame

Simple (set)

Bed-levelling knob quarter-turn caps

Track bed-levelling knob turns

Simple (set)

E-step calibration marking gauge

Calibrate extruder steps per millimetre

Simple

Heat-set insert plumb bridge

Press heat-set inserts in square

Advanced

Filament splice jig

Join two filament ends into one strand

Simple

Bowden coupler collet clips

Stop Bowden tubes moving in their couplers

Simple (set)

See all 21 in Maker & 3D printing

Make it fit your space

Change the size, walls, dividers, holes and labels of the resin strainer funnel for bottle return model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model