E-step calibration marking gauge — 3D-printable model preview

AR view

Maker & 3D printing Simple

E-step calibration marking gauge

Calibrate extruder steps per millimetre

Stand the foot on top of the extruder, lay the filament along the strip and mark it at the 120 mm notch; extrude 100 mm and the mark should sit at the 100 mm notch. Any gap tells you exactly how far to correct the extruder steps, without juggling a ruler and a pen.

Customize this model

Size: 135 × 24 × 8 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 5.0 cm³
Est. weight (PLA): 6.2 g
Parts to print: 1
Category: Maker & 3D printing
Made by: Krypto
Built in: 5 steps

What’s in it

Custom outline, 135 × 24 × 8 mm, with 3.0 mm walls
Custom outline traced from a shape

How to print it

Prints flat as a plate, no supports.

Filament: at most about 6.2 g of PLA printed solid (roughly $0.12 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the E-step calibration marking gauge model?

The E-step calibration marking gauge model measures 135 × 24 × 8 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints flat as a plate, no supports.

How much filament does it use?

At most about 6.2 g of PLA (5.0 cm³ printed solid), roughly $0.12 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More maker & 3d printing

Resin strainer funnel for bottle return

Filter resin back into its bottle

Medium

2020 extrusion filament guide clip

Guide filament past a printer frame

Simple (set)

TPU dry-box filament grommet

Feed filament out of a sealed dry box

Medium

Bed-levelling knob quarter-turn caps

Track bed-levelling knob turns

Simple (set)

Two-handled spool rewinding crank

Rewind filament evenly onto another spool

Medium

Heat-set insert plumb bridge

Press heat-set inserts in square

Advanced

Filament splice jig

Join two filament ends into one strand

Simple

Bowden coupler collet clips

Stop Bowden tubes moving in their couplers

Simple (set)

See all 21 in Maker & 3D printing

Make it fit your space

Change the size, walls, dividers, holes and labels of the E-step calibration marking gauge model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model