Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Flower press plate
By Krypto
Complexity
Medium (set)
Others Crafts & making
0
Flower press plate
MAIN PURPOSE: Press and dry flowers between plates
Print two to make a flower press: sandwich flowers between paper and card, bolt the plates together through the corners with M6 bolts and wing nuts, and the vents let the moisture out.
Printing notes
126.0 cm³
Volume
156.2 g
Est. weight
17,468
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Spill-resistant travel water bowl
By Krypto
Complexity
Medium
Others Pets & aquarium
0
Spill-resistant travel water bowl
MAIN PURPOSE: Carry water for dogs in cars
A dog water bowl for the car or van: the inward-turned top catches the water as it sloshes so it stays in the bowl round corners, and grip feet hold it on the mat.
Printing notes
223.9 cm³
Volume
277.7 g
Est. weight
1,992
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Egg gathering basket
By Krypto
Complexity
Medium
Others Pets & aquarium
0
Egg gathering basket
MAIN PURPOSE: Collect and rinse coop eggs
Collect eggs from the coop and rinse them in the same basket: honeycomb sides let the water drain, the dimpled floor stops eggs rolling, and there is a hand hole at each end.
Printing notes
101.3 cm³
Volume
125.6 g
Est. weight
35,288
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Aquarium heater guard
By Krypto
Complexity
Medium
Others Pets & aquarium
0
Aquarium heater guard
MAIN PURPOSE: Shield animals from a hot heater
A slotted sleeve that slides over an aquarium heater so large fish, turtles and axolotls can't rest against the hot glass, while water flows freely through the slots. Print it in PETG.
Printing notes
5.3 cm³
Volume
6.6 g
Est. weight
32,072
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Wargaming ruined building
By Krypto
Complexity
Medium
Others Tabletop gaming & play
0
Wargaming ruined building
MAIN PURPOSE: Add ruined terrain to wargame tables
Tabletop terrain for 28 mm wargames: a ruined two-storey corner with arched windows, a doorway, a broken-down front wall and a paved floor, ready to paint.
Printing notes
117.0 cm³
Volume
145.0 g
Est. weight
5,540
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Shadow puppet theatre
By Krypto
Complexity
Medium
Others Kids & play
0
Shadow puppet theatre
MAIN PURPOSE: Stage shadow puppet shows on tabletops
A tabletop shadow theatre: tape baking paper over the stage window, shine a torch through the open back, and lower card puppets on sticks through the slots in the roof.
Printing notes
42.9 cm³
Volume
53.2 g
Est. weight
4,050
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

AR view Open in app
Preview of Seven-inch single record crate
By Krypto
Complexity
Medium
Others Music & audio
0
Seven-inch single record crate
MAIN PURPOSE: Store and browse 7-inch singles
A crate for about a hundred 7-inch singles: the sleeves stand a little proud of the sides so you can flip through them, with carry holes at each side and a slatted front.
Printing notes
139.5 cm³
Volume
173.0 g
Est. weight
3,132
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Owl pellet sorting tray
By Krypto
Complexity
Medium
Others Science & education
0
Owl pellet sorting tray
MAIN PURPOSE: Sort bones from owl pellets
Sort the bones from a dissected owl pellet into six labelled bays, for skulls, jaws, ribs, legs, spine and everything else, for a tidy, hands-on science lesson.
Printing notes
82.4 cm³
Volume
102.2 g
Est. weight
17,684
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Pendant lamp shade
By Krypto
Complexity
Medium
Others Geometric & decorative
0
Pendant lamp shade
MAIN PURPOSE: Shade a pendant bulb with honeycomb light
A honeycomb-perforated pendant shade that hangs from a standard E27 lampholder through the hole in its top; use an LED bulb of 10 W or less. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
64.5 cm³
Volume
80.0 g
Est. weight
22,392
Triangles

Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Arched wall niche
By Krypto
Complexity
Medium
Others Home hardware & architecture
0
Arched wall niche
MAIN PURPOSE: Display small plants and candles on walls
An arched niche for the wall with a shelf across the middle: hang it by the two screw holes in the back and show off small plants, candles in jars or a stack of postcards.
Printing notes
268.6 cm³
Volume
333.0 g
Est. weight
820
Triangles

Prints as shown on its outline, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan