Store and browse 7-inch singles
A crate for about a hundred 7-inch singles: the sleeves stand a little proud of the sides so you can flip through them, with carry holes at each side and a slatted front.
Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.
Filament: at most about 173 g of PLA printed solid (roughly $3.46 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The seven-inch single record crate model measures 200 × 250 × 150 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
It may need supports in places. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.
At most about 173 g of PLA (139 cm³ printed solid), roughly $3.46 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the seven-inch single record crate model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.