Stage shadow puppet shows on tabletops
A tabletop shadow theatre: tape baking paper over the stage window, shine a torch through the open back, and lower card puppets on sticks through the slots in the roof.
Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.
Filament: at most about 53.2 g of PLA printed solid (roughly $1.06 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The shadow puppet theatre model measures 240 × 90 × 170 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
It may need supports in places. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.
At most about 53.2 g of PLA (42.9 cm³ printed solid), roughly $1.06 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the shadow puppet theatre model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.