Build snow forts with even bricks
Pack snow into the mould, smooth the top and tip out a perfect brick; stack the bricks for a snow fort or an igloo. The hand holes make it easy to flip.
Print in PETG or ASA, which stays tough in the cold.
Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.
Filament: at most about 110 g of PLA printed solid (roughly $2.21 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The snow brick mould model measures 240 × 120 × 100 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
It may need supports in places. Print in PETG or ASA, which stays tough in the cold. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.
At most about 110 g of PLA (89.0 cm³ printed solid), roughly $2.21 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the snow brick mould model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.