Shade a pendant bulb with honeycomb light
A honeycomb-perforated pendant shade that hangs from a standard E27 lampholder through the hole in its top; use an LED bulb of 10 W or less. Print it as shown, then turn it over so the floor becomes the top.
Print floor-down as shown, then turn it over to use it.
Filament: at most about 80.0 g of PLA printed solid (roughly $1.60 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The pendant lamp shade model measures 180 × 180 × 200 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
Usually not. Print floor-down as shown, then turn it over to use it.
At most about 80.0 g of PLA (64.5 cm³ printed solid), roughly $1.60 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the pendant lamp shade model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.