Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Leveling shim with slot
By Krypto
Complexity
Simple (set)
Workshop Tools & jigs
0
Leveling shim with slot
MAIN PURPOSE: Level furniture and appliances
Slides under a wobbly table leg, a cabinet foot or a washing machine without lifting it far: the slot goes round a screw or adjustable foot. Print a few in different thicknesses.
Printing notes
4.3 cm³
Volume
5.3 g
Est. weight
220
Triangles

Set the plate thickness (Wall) from 1 to 5 mm and print a set. Prints flat as a plate, no supports.

AR view Open in app
Preview of Two-wheel robot chassis plate
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Two-wheel robot chassis plate
MAIN PURPOSE: Build a small hobby robot
A base plate for a small two-wheel robot: the wheels sit in the side slots, a ball caster goes through the front hole, and the four small holes take a microcontroller board, with a cable hole in the middle.
Printing notes
63.2 cm³
Volume
78.4 g
Est. weight
2,960
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of 80 mm fan guard
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
80 mm fan guard
MAIN PURPOSE: Guard an 80 mm cooling fan
A honeycomb finger guard for an 80 mm cooling fan in a printer, a PC or an electronics box; it bolts on through the four corner holes with the fan's own screws.
Printing notes
11.3 cm³
Volume
14.0 g
Est. weight
3,660
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Helping hands base for coolant hose arms
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Helping hands base for coolant hose arms
MAIN PURPOSE: Hold circuit boards and wires while soldering
A heavy base for home-made helping hands: push four 1/4-inch segmented coolant hose arms with crocodile clips into the top holes, and fill the base with sand through the bottom hole so it stays put while you solder.
Printing notes
87.5 cm³
Volume
108.5 g
Est. weight
1,840
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Keycap puller
By Krypto
Complexity
Simple
Workshop Electronics & robotics
0
Keycap puller
MAIN PURPOSE: Remove keyboard keycaps safely
Pulls keycaps off a mechanical keyboard evenly without scratching them: slide the two prongs down either side of the cap until the hooks catch under it, then lift straight up.
Printing notes
10.5 cm³
Volume
13.0 g
Est. weight
880
Triangles

Prints as shown on its outline, no supports.

AR view Open in app
Preview of Wooden dovetail marker
By Krypto
Complexity
Simple
Workshop Woodworking
0
Wooden dovetail marker
MAIN PURPOSE: Mark dovetail joints
Marks dovetails for hand-cut joints: hook the fence over the board end and draw along the 1:6 face for hardwood or the 1:8 face for softwood.
Printing notes
34.0 cm³
Volume
42.2 g
Est. weight
532
Triangles

Print with 100% infill for crisp, true edges. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Router and saw setup blocks
By Krypto
Complexity
Simple
Workshop Woodworking
0
Router and saw setup blocks
MAIN PURPOSE: Set tool heights quickly
Five precise steps from 5 to 25 mm for setting router bit height, saw blade height or fence distance quickly without measuring.
Printing notes
22.9 cm³
Volume
28.4 g
Est. weight
624
Triangles

Print with 100% infill and check against calipers. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Soldering tip cleaner cup
By Krypto
Complexity
Simple
Workshop Electronics & robotics
0
Soldering tip cleaner cup
MAIN PURPOSE: Clean soldering iron tips
A weighted cup for brass tip-cleaning wool: stuff the wool into the inner ring and wipe the hot iron tip through it, while the outer moat catches flux crumbs.
Printing notes
40.9 cm³
Volume
50.7 g
Est. weight
1,168
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Cabinet handle drilling template
By Krypto
Complexity
Advanced
Workshop Tools & jigs
0
Cabinet handle drilling template
MAIN PURPOSE: Drill matching holes for cabinet handles
Marks the screw holes for cabinet handles at the common 64, 96, 128 and 160 mm spacings: hook the fence over the door edge, line up the centre mark and drill through the guide holes.
Printing notes
63.7 cm³
Volume
79.0 g
Est. weight
13,068
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Paint can opener and stirrer
By Krypto
Complexity
Simple
Workshop Finishing & painting
0
Paint can opener and stirrer
MAIN PURPOSE: Open and stir paint tins
One flat stick for a tin of paint: lever the lid off with the hooked end, stir with the blade, and scrape the drips off on the rim.
Printing notes
21.8 cm³
Volume
27.0 g
Est. weight
136
Triangles

Prints flat as a plate, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan