Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Leveling shim with slot
By Krypto
Complexity
Simple (set)
Workshop Tools & jigs
0
Leveling shim with slot
MAIN PURPOSE: Level furniture and appliances
Slides under a wobbly table leg, a cabinet foot or a washing machine without lifting it far: the slot goes round a screw or adjustable foot. Print a few in different thicknesses.
Printing notes
4.3 cm³
Volume
5.3 g
Est. weight
220
Triangles

Set the plate thickness (Wall) from 1 to 5 mm and print a set. Prints flat as a plate, no supports.

AR view Open in app
Preview of Keycap puller
By Krypto
Complexity
Simple
Workshop Electronics & robotics
0
Keycap puller
MAIN PURPOSE: Remove keyboard keycaps safely
Pulls keycaps off a mechanical keyboard evenly without scratching them: slide the two prongs down either side of the cap until the hooks catch under it, then lift straight up.
Printing notes
10.5 cm³
Volume
13.0 g
Est. weight
880
Triangles

Prints as shown on its outline, no supports.

AR view Open in app
Preview of Wooden dovetail marker
By Krypto
Complexity
Simple
Workshop Woodworking
0
Wooden dovetail marker
MAIN PURPOSE: Mark dovetail joints
Marks dovetails for hand-cut joints: hook the fence over the board end and draw along the 1:6 face for hardwood or the 1:8 face for softwood.
Printing notes
34.0 cm³
Volume
42.2 g
Est. weight
532
Triangles

Print with 100% infill for crisp, true edges. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Router and saw setup blocks
By Krypto
Complexity
Simple
Workshop Woodworking
0
Router and saw setup blocks
MAIN PURPOSE: Set tool heights quickly
Five precise steps from 5 to 25 mm for setting router bit height, saw blade height or fence distance quickly without measuring.
Printing notes
22.9 cm³
Volume
28.4 g
Est. weight
624
Triangles

Print with 100% infill and check against calipers. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Soldering tip cleaner cup
By Krypto
Complexity
Simple
Workshop Electronics & robotics
0
Soldering tip cleaner cup
MAIN PURPOSE: Clean soldering iron tips
A weighted cup for brass tip-cleaning wool: stuff the wool into the inner ring and wipe the hot iron tip through it, while the outer moat catches flux crumbs.
Printing notes
40.9 cm³
Volume
50.7 g
Est. weight
1,168
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Paint can opener and stirrer
By Krypto
Complexity
Simple
Workshop Finishing & painting
0
Paint can opener and stirrer
MAIN PURPOSE: Open and stir paint tins
One flat stick for a tin of paint: lever the lid off with the hooked end, stir with the blade, and scrape the drips off on the rim.
Printing notes
21.8 cm³
Volume
27.0 g
Est. weight
136
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Plastic putty knife
By Krypto
Complexity
Simple
Workshop Finishing & painting
0
Plastic putty knife
MAIN PURPOSE: Spread filler without scratching
A flexible putty knife for filler, wood putty and silicone that won't scratch tiles, glass or painted surfaces.
Printing notes
17.9 cm³
Volume
22.2 g
Est. weight
172
Triangles

Print in PETG for a little flex. Prints flat as a plate, no supports.

AR view Open in app
Preview of 2020 extrusion end cap
By Krypto
Complexity
Simple (set)
Workshop Electronics & robotics
0
2020 extrusion end cap
MAIN PURPOSE: Cap aluminium extrusion ends
A neat end cap for 20 x 20 mm aluminium extrusion: push it over the cut end to cover the sharp edges on a printer frame or a workbench. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
0.6 cm³
Volume
0.8 g
Est. weight
992
Triangles

Print a handful. Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Ruler stop block
By Krypto
Complexity
Simple
Workshop Tools & jigs
0
Ruler stop block
MAIN PURPOSE: Repeat measurements quickly
Slides onto a 25 mm steel rule and locks with a small screw, so you can mark the same measurement again and again without reading the scale.
Printing notes
2.6 cm³
Volume
3.3 g
Est. weight
1,816
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Model railway servicing cradle
By Krypto
Complexity
Simple
Workshop Tools & jigs
0
Model railway servicing cradle
MAIN PURPOSE: Hold locomotives upside down for servicing
Lay a locomotive or coach upside down in the rounded channel to clean its wheels or service the motor; the open ends take models longer than the cradle. Line it with foam to protect the paint.
Printing notes
46.2 cm³
Volume
57.2 g
Est. weight
4,150
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan