Models Showcase: free 3D-printable organizers

By Alpha

Complexity

Medium (set)

Bedroom & bathroom Others Geometric & decorative

1

MAIN PURPOSE: Display a single stem or dried flowers

A tall gourd-shaped vase with a low round belly and a long slim neck that flares out at the lip, wrapped in sharp pleats that twist 45° around it. The pleats are deepest at the belly and fade away up the neck, so the swirl looks like it's spinning upward. About 110 mm across the pleats and 150 mm tall, made for a single stem or a few dried flowers.
Prints in one piece with no supports. Change the height, the belly or the neck in the editor to make your own.

Printing notes

181.9 cm³

Volume

225.5 g

Est. weight

105,380

Triangles

Slow the print down for the slim neck, or print two at once, so each small layer can cool. Silk or dual-colour PLA makes the twist stand out. For fresh flowers, print in PETG or slip a glass test tube into the neck. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Kitchen Others Serving & table Free for members

2

Vaze Swirl Footed Bowl

MAIN PURPOSE: Serve fruit and snacks, or hold keys

A wide, shallow bowl wrapped in sharp pleats that twist 45° around it and swell out at the middle, standing on three slim splayed legs. About 150 mm across with a low 25 mm bowl, so it's ideal for fruit, snacks, keys or a candle on a table or shelf.

The legs print separately and press into holes under the bowl, so every part prints flat with no supports. Change the size, the pleat depth or the twist in the editor to make your own.

Printing notes

116.0 cm³

Volume

143.8 g

Est. weight

39,828

Triangles

Print the three legs separately and press them into the holes underneath; a drop of glue makes them permanent. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Bedroom & bathroom Others Geometric & decorative

1

Vaze Swirl Bottle

MAIN PURPOSE: Display dried flowers or a single stem

A small bottle vase with a round belly and a narrow neck, wrapped in sharp pleats that twist 45° around it. The pleats are deepest at the belly and thin out towards the neck, so it reads like a classic bottle with a swirl. About 110 mm across the pleats and 100 mm tall.

Prints in one piece with no supports. Change the size, the belly or the neck in the editor to make your own.

Printing notes

181.2 cm³

Volume

224.7 g

Est. weight

21,080

Triangles

Silk or dual-colour PLA makes the twist stand out. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Others Geometric & decorative

0

Vaze Tall Swirl

MAIN PURPOSE: Hold dried flowers, pens or brushes

A tall, slim vase wrapped in sharp pleats that twist 45° around it and swell gently through the middle. 150 mm tall with a 60 mm body (about 80 mm across the pleats), so it suits a single stem, dried flowers or grasses, or pens, brushes and kitchen utensils.

Prints in one piece with no supports. Change the height, the diameter, the pleat depth or the twist in the editor to make your own.

Printing notes

174.5 cm³

Volume

216.4 g

Est. weight

23,784

Triangles

Use 3 walls so the pleats print solid. For fresh flowers in water, print in PETG or stand a glass inside. Prints as shown on its floor, no supports.

AR view Open in app

By Alpha

Complexity

Medium

Desk & office Bedroom & bathroom Others Geometric & decorative

0

Vaze Swirl Dish

MAIN PURPOSE: Catch keys, rings and small trinkets

A low dish wrapped in sharp pleats that twist 45° around it, swelling out at the middle like a spun bowl. About 120 mm across and 30 mm tall, it's a neat catch-all for keys, rings, coins, earbuds or a candle.

Prints in one piece with no supports. Change the size, the pleat depth or the twist in the editor to make your own.

Printing notes

53.7 cm³

Volume

66.6 g

Est. weight

21,056

Triangles

Silk or dual-colour PLA makes the twist stand out; 3 walls keep the pleats solid. Prints as shown on its floor, no supports.

AR view Open in app

Preview of Stackable Storage Box – 3 Compartments (Customisable Size)

By Krypto

Complexity

Medium

Workshop Others Drawer & cabinet organisers

2

Stackable Storage Box – 3 Compartments (Customisable Size)

MAIN PURPOSE: Sort and stack everyday items in three compartments

A roomy, stackable storage box with three compartments: one large section and two smaller ones side by side. It suits tools, craft supplies, chargers and cables, toiletries, snacks or toys. As it comes it's 210 × 210 × 63 mm with 2 mm walls and softly rounded corners. The dividers sit a little lower than the walls, so things are easy to reach. Every dimension can be changed in the editor: width, depth, height, wall thickness, corner radius, and the number, position and height of the dividers. That way you can size it for your own drawer, shelf or cupboard. The Raised grip base lets one box stack firmly on another, so you can build a neat tower without anything sliding off. It prints as one solid piece with no supports.

Printing notes

345.1 cm³

Volume

427.9 g

Est. weight

1,924

Triangles

Print upright in PLA or PETG with no supports. Use 3 walls (perimeters) for a sturdier box. Prints as shown on its floor, no supports.

AR view Open in app

Preview of Blank round projecting sign with wall flange

By Krypto

Complexity

Medium

Desk & office Others Signs, tags & keychains

0

Blank round projecting sign with wall flange

MAIN PURPOSE: A customizable sign that sticks out from a wall or door frame, readable from the side

A blank round sign (120 mm) on a small square flange, so it sticks out from the wall like a shop sign and can be read from down the hall or along the aisle. Add your own words or icon on both faces in Text & Design. Mount the flange with double-sided tape, or screw it on through the two ready-made holes. Prints in one piece, no supports.

Printing notes

49.2 cm³

Volume

61.0 g

Est. weight

512

Triangles

Print it as it comes out: disc flat on the bed, flange standing up, no supports. Use 4 walls (perimeters) so the joint between disc and flange is solid. Screw it on through the two 4.5 mm holes with 4 mm wood screws, or stick the flange on with strong double-sided foam tape (VHB type).

AR view Customize

Preview of Bowerbird forced-perspective display court

By Krypto

Complexity

Medium

Others Collections & display

0

Bowerbird forced-perspective display court

MAIN PURPOSE: Display a collection in rows that deepen front to back so every piece looks the same size

Male great bowerbirds lay out pebbles, bones and shells in front of their bower sorted by size: small ones near the entrance, large ones further away. From where the female stands, the court looks evenly paved and the male looks bigger than he is. It is the only known forced-perspective illusion made by an animal. This display court copies the trick: five rows that grow deeper towards the back. Sort sea glass, shells, minerals or dice by size, smallest at the front, and from the front edge the whole collection seems to be one even size.

Printing notes

134.9 cm³

Volume

167.2 g

Est. weight

4,688

Triangles

Prints flat. Put the smallest pieces in the front row and the biggest at the back, then look from the front edge. Prints as shown on its floor, no supports.

AR view Open in app

By Krypto

Complexity

Advanced

Others Kids & play

0

Alignment-puzzle money box

MAIN PURPOSE: Drop a coin through three turning layers that only let it fall when every hole lines up

A money box that has to be solved before it will take your money. The coin slot in the cap sits over three layers, each with a single coin hole in a different corner. Lift each layer, turn it a quarter, and put it back until all the holes stack up under the slot; get it right and the coin clatters all the way down into the bank. Get it wrong and it stops on a layer, rattling. To empty it, lift everything off.

Printing notes

175.9 cm³

Volume

218.2 g

Est. weight

8,696

Triangles

Print each layer separately. Every layer lifts off and goes back in any of four turns; change the order to reset the puzzle. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app

By Krypto

Complexity

Advanced

Others Tabletop gaming & play

0

Pachinko decision board

MAIN PURPOSE: Drop a marble past the bumpers and let it decide: YES, NO, MAYBE or AGAIN

For decisions nobody can agree on. Lean the board back, drop a marble in at the top, and it bounces off two rows of bumpers before landing in one of four bays: YES, NO, MAYBE or AGAIN. Because each bumper sends it left or right by chance, the middle bays come up more often than the outer ones, just like a Galton board. Relabel the bays for dinner choices, chores or who goes first.

Printing notes

93.6 cm³

Volume

116.0 g

Est. weight

11,316

Triangles

Lean it back against a wall or a stack of books at about 60 degrees, open side up, and drop a 14-16 mm marble in at the top. Prints as shown on its floor, no supports.

AR view Open in app