Pachinko decision board — 3D-printable model preview

AR view

Tabletop gaming & play Advanced

Pachinko decision board

Drop a marble past the bumpers and let it decide: YES, NO, MAYBE or AGAIN

For decisions nobody can agree on. Lean the board back, drop a marble in at the top, and it bounces off two rows of bumpers before landing in one of four bays: YES, NO, MAYBE or AGAIN. Because each bumper sends it left or right by chance, the middle bays come up more often than the outer ones, just like a Galton board. Relabel the bays for dinner choices, chores or who goes first.

Customize this model

Size: 160 × 220 × 18 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 93.6 cm³
Est. weight (PLA): 116 g
Parts to print: 1
Category: Tabletop gaming & play
Made by: Krypto
Built in: 77 steps

What’s in it

Rectangular, 160 × 220 × 18 mm, with 2.4 mm walls
8 dividers
Engraved and raised text: “YES”, “NO”, “MAYBE”, “AGAIN”, “DROP”

How to print it

Lean it back against a wall or a stack of books at about 60 degrees, open side up, and drop a 14-16 mm marble in at the top.

Prints as shown on its floor, no supports.

Filament: at most about 116 g of PLA printed solid (roughly $2.32 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the pachinko decision board model?

The pachinko decision board model measures 160 × 220 × 18 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Lean it back against a wall or a stack of books at about 60 degrees, open side up, and drop a 14-16 mm marble in at the top. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 116 g of PLA (93.6 cm³ printed solid), roughly $2.32 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More tabletop gaming & play

Bead-and-loop rope puzzle

Solve a cord and bead disentanglement puzzle

Simple

Steady-hand buzz-wire game base

Build a steady-hand electric skill game

Multi-part assembly

Fidget spinner frame for 608 bearings

Spinning desk toy built around 608 bearings

Medium

Miniature condition rings

Mark miniature status in tabletop games

Simple (set)

Monty Hall three-door game

Play the famous probability puzzle with three lidded boxes, one prize and two duds

Multi-part assembly

Coin-toss bell-curve tower

Watch a bell curve build up, one bead for every shake of eight coins

Advanced

Lo Shu magic-square snack tray

Serve snacks in nine bays numbered so every line adds up to 15

Advanced

Shuffleboard desk rink

Slide coins into scoring zones on a desktop shuffleboard

Simple

See all 73 in Tabletop gaming & play

Make it fit your space

Change the size, walls, dividers, holes and labels of the pachinko decision board model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model