Shuffleboard desk rink — 3D-printable model preview

AR view

Tabletop gaming & play Simple

Shuffleboard desk rink

Slide coins into scoring zones on a desktop shuffleboard

Table shuffleboard shrunk to a desk: slide coins from the notched end and try to stop them in the 1, 2 or 3 zones engraved at the far end without falling off. Knock your opponent's coin out of the 3 and you have the classic pub game during a lunch break.

Customize this model

Size: 80 × 300 × 12 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 57.8 cm³
Est. weight (PLA): 71.7 g
Parts to print: 1
Category: Tabletop gaming & play
Made by: Krypto
Built in: 43 steps

What’s in it

Rectangular, 80 × 300 × 12 mm, with 2.4 mm walls
Engraved text: “1”, “2”, “3”, “START”

How to print it

Use four coins each; slide from the notched end, score where they stop, and knock opponents off.

Prints as shown on its floor, no supports.

Filament: at most about 71.7 g of PLA printed solid (roughly $1.43 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the shuffleboard desk rink model?

The shuffleboard desk rink model measures 80 × 300 × 12 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Use four coins each; slide from the notched end, score where they stop, and knock opponents off. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 71.7 g of PLA (57.8 cm³ printed solid), roughly $1.43 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More tabletop gaming & play

Bead-and-loop rope puzzle

Solve a cord and bead disentanglement puzzle

Simple

Steady-hand buzz-wire game base

Build a steady-hand electric skill game

Multi-part assembly

Fidget spinner frame for 608 bearings

Spinning desk toy built around 608 bearings

Medium

Miniature condition rings

Mark miniature status in tabletop games

Simple (set)

Carrom coin and striker case

Keep carrom coins, the queen and the striker together

Multi-part assembly

Lo Shu magic-square snack tray

Serve snacks in nine bays numbered so every line adds up to 15

Advanced

Coin-toss bell-curve tower

Watch a bell curve build up, one bead for every shake of eight coins

Advanced

Mahjong table hub

Keep dice and scoring sticks in the middle of a mahjong table

Multi-part assembly

See all 73 in Tabletop gaming & play

Make it fit your space

Change the size, walls, dividers, holes and labels of the shuffleboard desk rink model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model