Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Radiator top heat deflector
By Krypto
Complexity
Simple (set)
Others Sustainable living
0
Radiator top heat deflector
MAIN PURPOSE: Direct radiator heat into the room
Sits on top of a 100 mm double-panel radiator, gripping both panels: the shelf and the forward lip turn the rising warm air into the room instead of up behind the curtains or onto a cold window sill. Print several and butt them along the radiator.
Printing notes
173.8 cm³
Volume
215.6 g
Est. weight
744
Triangles

Print as it comes (profile on the bed) in PETG or ASA; radiators reach 70 C.

AR view Open in app
Preview of Bokashi bucket press plate
By Krypto
Complexity
Simple
Others Sustainable living
0
Bokashi bucket press plate
MAIN PURPOSE: Press air out of a bokashi compost bucket
After each layer of scraps and bran, push this plate down hard in the bokashi bucket to squeeze out the air the fermentation hates; six ribs keep the 220 mm plate stiff and give fingers a grip, and it stays on top as the cover layer.
Printing notes
226.2 cm³
Volume
280.5 g
Est. weight
1,528
Triangles

Check the inner diameter of your bucket first. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Bottle-to-bottle drain coupler
By Krypto
Complexity
Medium
Others Sustainable living
0
Bottle-to-bottle drain coupler
MAIN PURPOSE: Drain the last drops into a new bottle
Joins two bottles mouth to mouth: the 21 mm spigot plugs into the new bottle, the old one stands upside down in the cup above, and the last shampoo, sauce or washing-up liquid drains across overnight instead of going in the bin.
Printing notes
13.0 cm³
Volume
16.2 g
Est. weight
1,696
Triangles

TPU seals best in the bottle neck. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of T-shirt yarn cutting guide
By Krypto
Complexity
Medium
Others Sustainable living
0
T-shirt yarn cutting guide
MAIN PURPOSE: Cut old T-shirts into even yarn strips
Fold an old T-shirt flat under the board and run a rotary cutter down the seven slots: the strips come out an even 25 mm wide and stay joined along one edge, so a few diagonal snips turn them into one continuous strand of yarn for crochet rugs and baskets.
Printing notes
121.9 cm³
Volume
151.1 g
Est. weight
18,670
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Newspaper seedling pot maker
By Krypto
Complexity
Advanced
Others Sustainable living
0
Newspaper seedling pot maker
MAIN PURPOSE: Roll newspaper into seedling pots
Wrap a strip of newspaper twice round the 50 mm form, fold the overhang under and press the form down hard on the table to crease the base; slide the pot off, fill it with compost and later plant it out paper and all, so seedlings never need plastic pots.
Printing notes
49.1 cm³
Volume
60.9 g
Est. weight
4,452
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Recycled paper-making mould
By Krypto
Complexity
Medium
Others Sustainable living
0
Recycled paper-making mould
MAIN PURPOSE: Make recycled paper sheets from scrap
Blend scrap paper into pulp, tip it into a washing-up bowl and dip this frame: the grid floor carries a piece of fly screen, the walls act as the deckle, and you lift out an even A5 sheet to couch onto a cloth. Stir seeds into the pulp for plantable paper.
Printing notes
93.6 cm³
Volume
116.1 g
Est. weight
4,828
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Shower flow-rate test jug
By Krypto
Complexity
Simple
Others Sustainable living
0
Shower flow-rate test jug
MAIN PURPOSE: Measure shower flow to find water savings
Hold it under the shower for exactly six seconds and read the level: the marks give the flow in litres per minute. Anything over 9 means an aerated shower head would cut hot water, and the energy to heat it, straight away.
Printing notes
26.1 cm³
Volume
32.4 g
Est. weight
8,734
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Tealight cup refill tray
By Krypto
Complexity
Advanced
Others Sustainable living
0
Tealight cup refill tray
MAIN PURPOSE: Refill used tealight cups with leftover wax
Holds eight empty aluminium tealight cups level and upright while you refill them: drop in a wick on its sustainer, pour wax melted from old candle ends, and the cups get a second life instead of going in the bin.
Printing notes
59.5 cm³
Volume
73.8 g
Est. weight
2,348
Triangles

Print in PETG and pour the wax at 70 C or below. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Reusable bag drying pegs
By Krypto
Complexity
Advanced
Others Sustainable living
0
Reusable bag drying pegs
MAIN PURPOSE: Dry washed reusable bags open
Turn washed zip bags, produce bags and bread bags inside out and slip each over a peg: five staggered pegs of different heights hold them open so air reaches the inside, and they dry in hours instead of staying damp in a drawer.
Printing notes
128.2 cm³
Volume
158.9 g
Est. weight
5,204
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Charger cable strain-relief splint
By Krypto
Complexity
Simple (set)
Others Sustainable living
0
Charger cable strain-relief splint
MAIN PURPOSE: Stop charger cables fraying at the plug
Snap it over a charger or headphone cable where it starts to fray at the plug: the 30 mm sleeve stops the sharp bend that breaks the wires, so a tiny repair keeps the cable out of the e-waste bin for years.
Printing notes
2.8 cm³
Volume
3.4 g
Est. weight
792
Triangles

Print in TPU; print a few. Prints as shown on its outline, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan