Showcase
Models Showcase
Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category
MAIN PURPOSE: Hang bags behind a car seat
Clips round a front-seat headrest post and holds a handbag or shopping bag behind the seat, off the floor and out of the footwell.
Printing notes
10.4 cm³
Volume
12.9 g
Est. weight
824
Triangles
Print lying flat in PETG or ASA (car interiors get hot).
MAIN PURPOSE: Open tight bottle caps with less effort
Opens tight plastic bottle caps for anyone with a weak grip: push the tapered jaw over the cap until it wedges, then turn the long handle.
Printing notes
22.1 cm³
Volume
27.4 g
Est. weight
184
Triangles
Prints flat as a plate, no supports.
MAIN PURPOSE: Open ring-pull cans without hurting fingers
A keyring tool that lifts stiff ring-pull tabs on drinks cans and tins without breaking a nail: slip the hooked tip under the tab and lever up.
Printing notes
2.5 cm³
Volume
3.1 g
Est. weight
268
Triangles
Prints flat as a plate, no supports.
MAIN PURPOSE: Space tiles evenly
Cross-shaped spacers that keep wall and floor tiles evenly apart while the adhesive sets, so the grout lines come out straight.
Printing notes
0.7 cm³
Volume
0.9 g
Est. weight
44
Triangles
Print a batch; the plate thickness sets the grout gap. Prints flat as a plate, no supports.
MAIN PURPOSE: Set even gaps between deck boards
Hang it over a joist between two deck boards: the 5 mm blade sets an even drainage gap while you screw the board down.
Printing notes
21.4 cm³
Volume
26.5 g
Est. weight
416
Triangles
Print flat; print four.
MAIN PURPOSE: Let pupils leave the classroom with a pass
A tough hall pass for school corridors: hang it on a lanyard through the hole, and the class name goes in the raised text.
Printing notes
31.1 cm³
Volume
38.6 g
Est. weight
8,792
Triangles
Prints flat as a plate, no supports.
MAIN PURPOSE: Candle eggs during incubation
Check hatching eggs for growth: slip the cup over a small torch or a phone light, rest the egg on the soft rim and look for veins and movement in a dark room.
Printing notes
16.5 cm³
Volume
20.4 g
Est. weight
848
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Support work for jewellery sawing and filing
Clamp it to the bench edge to support silver sheet and wire while you saw, file and drill; the V cut-out lets the saw blade pass right through.
Printing notes
44.4 cm³
Volume
55.0 g
Est. weight
476
Triangles
Prints as shown on its outline, no supports.
MAIN PURPOSE: Keep opened sealant tubes from drying out
Push one onto a cut caulk or sealant nozzle and the tube stays usable for weeks instead of curing solid.
Printing notes
1.6 cm³
Volume
2.0 g
Est. weight
680
Triangles
Print a handful; TPU seals best. Prints as shown on its floor, no supports.
MAIN PURPOSE: Smooth a step at a door threshold
A low ramp for a door threshold up to 22 mm high, so robot vacuums, wheeled bins and walkers roll over instead of getting stuck.
Printing notes
185.2 cm³
Volume
229.6 g
Est. weight
260
Triangles
Print as it comes (ramp outline on the bed); print two side by side for a wide door.