Set even gaps between deck boards
Hang it over a joist between two deck boards: the 5 mm blade sets an even drainage gap while you screw the board down.
Print flat; print four.
Filament: at most about 26.5 g of PLA printed solid (roughly $0.53 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The deck board spacer model measures 70 × 61 × 20 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
Usually not. Print flat; print four.
At most about 26.5 g of PLA (21.4 cm³ printed solid), roughly $0.53 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the deck board spacer model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.