AR view

Ribbed lightweight plasterer's hawk

Carry plaster or mortar on a light hawk

A 250 mm hawk printed face down: the flat face carries the plaster, a grid of ribs underneath keeps it stiff and light, and the 40 mm handle stands on the centre cross. Easy to wash, and it never warps after a soaking the way plywood hawks do.

Customize this model

Size (Base A): 250 × 250 × 12 mm
Shape: Square
Walls: 3.0 mm
Volume: 266 cm³
Est. weight (PLA): 330 g
Parts to print: 1
Category: Trade & professional tools
Made by: Krypto
Built in: 18 steps

What’s in it

Square, 250 × 250 × 12 mm, with 3.0 mm walls
6 dividers in a grid layout
One more base built on (Base B)
Base B: round, Ø 40 mm, 100 mm tall (stacked)

How to print it

Needs a 250 mm bed; print in PETG.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 330 g of PLA printed solid (roughly $6.59 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the ribbed lightweight plasterer's hawk model?

The ribbed lightweight plasterer's hawk model measures 250 × 250 × 12 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Needs a 250 mm bed; print in PETG. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 330 g of PLA (266 cm³ printed solid), roughly $6.59 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More trade & professional tools

Survey pole bull's-eye level clip

Hold a survey pole plumb

Simple

Spark plug thread starter

Start spark plugs without cross-threading

Medium

Upholstery tucking tool

Tuck fabric into furniture frames

Simple

Notched-trowel wear gauge

Check when a notched trowel is worn out

Medium

Copper pipe square-marking collar

Mark square cuts on copper pipe

Simple

Conductor size and strip-length card

Strip wires to length and check conductor size

Medium

Four-radius fingerboard gauge

Match string height to the fingerboard radius

Medium

Picture-hanging nail-position marker

Mark where a picture hook must go

Simple

See all 22 in Trade & professional tools

Make it fit your space

Change the size, walls, dividers, holes and labels of the ribbed lightweight plasterer's hawk model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model