Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Basket-weave roll and fruit server
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Basket-weave roll and fruit server
MAIN PURPOSE: Serve rolls and fruit in a woven-look basket
An oval basket with a woven look all round, for rolls, bread and fruit on the table.
Printing notes
243.3 cm³
Volume
301.7 g
Est. weight
36,680
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Knurled sprinkle shaker with lid holes
By Krypto
Complexity
Multi-part assembly
Kitchen Food preparation
0
Knurled sprinkle shaker with lid holes
MAIN PURPOSE: Sprinkle salt, spice or sugar from a grippy shaker
A small screw-lid shaker with a knurled grip and holes through the lid. For flaky salt, chilli flakes, sugar or powdered spice.
Printing notes
71.1 cm³
Volume
88.2 g
Est. weight
85,168
Triangles

Print the lid face down. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app
Preview of Stacking scoop-front produce tray
By Krypto
Complexity
Medium
Kitchen Food storage
0
Stacking scoop-front produce tray
MAIN PURPOSE: Stack open trays for fruit and vegetables
An open-front tray with a scoop-down front so you can reach in, a stacking lip so trays pile up inside each other, and vertical slots through the walls for air. For fruit, potatoes or onions.
Printing notes
201.9 cm³
Volume
250.4 g
Est. weight
7,288
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Pedestal pie-slice snack server
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Pedestal pie-slice snack server
MAIN PURPOSE: Serve six snacks or dips in wedges
A round server divided into six slices by radial walls, on a short flared pedestal. Six snacks or dips, one in each wedge.
Printing notes
334.6 cm³
Volume
414.8 g
Est. weight
4,164
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Basket-weave picnic caddy with bar handle
By Krypto
Complexity
Medium
Kitchen Serving & table
0
Basket-weave picnic caddy with bar handle
MAIN PURPOSE: Carry cutlery, napkins and cups to the table in one go
A woven-look caddy with two dividers and a straight bar handle in the middle. Cutlery in one bay, napkins in the next, cups or sauce pots in the third, all carried in one hand to the picnic table.
Printing notes
280.4 cm³
Volume
347.7 g
Est. weight
106,772
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Fluted two-tier square stand with carry handle
By Krypto
Complexity
Medium
Kitchen Baking & sweets
0
Fluted two-tier square stand with carry handle
MAIN PURPOSE: Serve cupcakes, cookies or fruit on two tiers
Two square trays with a fluted rib all the way round, on a flared fluted pedestal, with a loop handle on top to carry it by. For cupcakes, cookies, fruit or small things on a desk. Every part prints separately and screws together.
Printing notes
416.9 cm³
Volume
517.0 g
Est. weight
47,582
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Knurled three-tier stand with heart top
By Krypto
Complexity
Advanced
Kitchen Baking & sweets
0
Knurled three-tier stand with heart top
MAIN PURPOSE: Serve sweets, cupcakes or treats on three tiers
Three round trays (150, 130 and 110 mm) with a knurled diamond grip all the way round, on screw-in columns, topped with a heart loop to carry it by. For sweets, cupcakes, jewellery or bits on a desk. Every part prints separately and screws together.
Printing notes
270.3 cm³
Volume
335.1 g
Est. weight
151,614
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Coaster cabinet
By Krypto
Complexity
Multi-part assembly
Kitchen Coffee & tea
0
Coaster cabinet
MAIN PURPOSE: Keep tea bags, sugar sachets and stirrers in a slim drawer under your mug
A coaster that hides a pantry. Your mug sits on the flat top, and a slim drawer underneath slides out with the tea bags, sugar sachets, stirrers and a spoon, so a desk or bedside tea break needs nothing else nearby. The drawer has no handle; a fingertip under its lip opens it, so from the side it just looks like a thick, neat coaster.
Printing notes
117.6 cm³
Volume
145.8 g
Est. weight
1,052
Triangles

Print the drawer and the sleeve. The sleeve's flat top is the coaster; PETG takes a hot mug best. Prints as shown on its floor, no supports. The drawer prints separately from the case.

AR view Open in app
Preview of Fake-mould anti-theft lunch box
By Krypto
Complexity
Multi-part assembly
Kitchen Food storage
0
Fake-mould anti-theft lunch box
MAIN PURPOSE: Stop office fridge thieves with a lunch box that looks like a mouldy lab sample
Every shared office fridge has a lunch thief. This box defends your sandwich by looking like the last thing anyone wants to open: its sides are covered in raised, blotchy spots like a fuzzy patch of mould, and the lid says LAB SAMPLE 7. Thieves move on to the next box. Inside, it is a perfectly clean, ordinary lunch box with a deep slip-on lid.
Printing notes
223.1 cm³
Volume
276.7 g
Est. weight
37,316
Triangles

Print it in a sickly grey-green. The spots are raised on all four sides. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Spherification caviar kit
By Krypto
Complexity
Advanced
Kitchen Food preparation
0
Spherification caviar kit
MAIN PURPOSE: Make bursting pearls of juice by dripping alginate into a calcium bath
In 2003 the elBulli kitchen discovered spherification: drip juice mixed with a little alginate (from seaweed) into a calcium bath, and each drop instantly grows a thin jelly skin while staying liquid inside. Load the syringes standing in the rack, drip mango, balsamic or cola into the BATH, lift the pearls into the RINSE, then spoon them into the SERVE bay. They pop on the tongue like caviar, a bit of modernist cooking for any home kitchen.
Printing notes
82.8 cm³
Volume
102.7 g
Est. weight
10,400
Triangles

Food-safe PETG. Blend 1 g sodium alginate into 200 ml juice and dissolve 2.5 g calcium chloride in 500 ml water. Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan