Sprinkle salt, spice or sugar from a grippy shaker
A small screw-lid shaker with a knurled grip and holes through the lid. For flaky salt, chilli flakes, sugar or powdered spice.
Print the lid face down.
Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.
Filament: at most about 88.2 g of PLA printed solid (roughly $1.76 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).
The knurled sprinkle shaker with lid holes model measures Ø 65 mm, 80 mm tall. You can change every size in the free SO3D.xyz generator before you download it.
No. Print the lid face down. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.
At most about 88.2 g of PLA (71.1 cm³ printed solid), roughly $1.76 of filament at $20 per kg. Normal infill uses less.
3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the knurled sprinkle shaker with lid holes model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.