Vinaigrette ratio shaker — 3D-printable model preview

AR view

Food preparation Multi-part assembly

Vinaigrette ratio shaker

Mix salad dressing to the right ratio without measuring

A tall screw-top shaker with fill rings round the outside. Pour oil to the upper mark and vinegar to the lower one for the classic 3:1 dressing, add mustard and salt, screw on the lid and shake.

Customize this model

Size: Ø 70 mm, 150 mm tall
Shape: Round
Walls: 2.0 mm
Volume: 119 cm³
Est. weight (PLA): 148 g
Parts to print: 3
Category: Food preparation
Made by: Krypto
Built in: 15 steps

What’s in it

Round, Ø 70 mm, 150 mm tall, with 2.0 mm walls
Raised text: “OIL”, “VINEGAR”
1 patterned wall panel (engraved)
Screw-on lid (prints separately)

How to print it

Print in clear PETG to see the fill lines from inside.

Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 148 g of PLA printed solid (roughly $2.95 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the vinaigrette ratio shaker model?

The vinaigrette ratio shaker model measures Ø 70 mm, 150 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in clear PETG to see the fill lines from inside. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 148 g of PLA (119 cm³ printed solid), roughly $2.95 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More food preparation

Jar lid gripper pad

Open stuck jar lids

Medium

Rice rinsing bowl with drain wall

Rinse rice and grains

Medium

Tofu press box

Press water out of tofu

Multi-part assembly

Sushi rice mixing tub

Season and cool sushi rice

Simple

Pressed sushi mould

Press rice into box sushi

Multi-part assembly

Suribachi grinding bowl with combed grooves

Grind sesame, nuts and spices with a wooden pestle

Medium

Three-tier microgreen sprouter tower

Grow fresh sprouts in a stack that drains itself

Advanced

Nesting prep bowls with pour scoop

Tip chopped ingredients into the pan, then nest the bowls away

Simple (set)

See all 49 in Food preparation

Make it fit your space

Change the size, walls, dividers, holes and labels of the vinaigrette ratio shaker model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model