Showcase
Models Showcase
Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category
MAIN PURPOSE: Lift the toilet seat without touching it
Stick the pad to the underside of the toilet seat near the front: the angled tab gives a finger something to lift, so nobody grabs the rim of the seat itself. Small, discreet and easy to wipe.
Printing notes
11.5 cm³
Volume
14.3 g
Est. weight
408
Triangles
Print as it comes (profile on the bed) in PETG; fix with waterproof tape.
MAIN PURPOSE: Soak aligners and lift them out hands-free
Put aligners, a retainer or a night guard in the slotted basket and stand it in a tumbler of cleaning solution: afterwards lift it out by the tall tab and rinse it under the tap, without dipping fingers in the solution.
Printing notes
6.3 cm³
Volume
7.8 g
Est. weight
13,110
Triangles
Fits a tumbler 80 mm or wider. Prints as shown on its floor, no supports.
MAIN PURPOSE: Descale a fixed shower head without removing it
Fill the cup with vinegar, lift it up round a fixed shower head and hook a bungee through the side holes over the arm: the nozzles soak overnight and the limescale comes off with a thumb, no unscrewing needed.
Printing notes
47.8 cm³
Volume
59.3 g
Est. weight
4,372
Triangles
PETG with 3 walls so it stays watertight. Prints as shown on its floor, no supports.
MAIN PURPOSE: Pull hair clogs out of basin drains
Feed the 240 mm strip down the plughole and pull it back by the ring: the barbs along both edges catch the clump of hair that slows the drain, so the basin runs freely again without chemicals.
Printing notes
3.3 cm³
Volume
4.1 g
Est. weight
732
Triangles
Print flat in PETG; it flexes round the trap.
MAIN PURPOSE: Hang belts in a wardrobe
Hangs up to six belts by their buckles on one rail hook, so they stay flat and uncreased instead of curled in a drawer.
Printing notes
20.2 cm³
Volume
25.1 g
Est. weight
1,000
Triangles
Print flat in PETG.
MAIN PURPOSE: Add a hook to any door without screws
Hangs a dressing gown, a towel or tomorrow's outfit on any door up to 40 mm thick, with no screws: the top hooks over the door and the hook sits low on the back.
Printing notes
29.8 cm³
Volume
37.0 g
Est. weight
552
Triangles
Print lying flat so the layers run along the hook.
MAIN PURPOSE: Hang clothes vertically to save rail space
Doubles wardrobe rail space: hook it over one hanger's neck and hang the next hanger from the eye below, so several outfits hang one under another.
Printing notes
9.2 cm³
Volume
11.4 g
Est. weight
664
Triangles
Print flat in PETG; print one per extra hanger.
MAIN PURPOSE: Put shoes on without crushing the heel
A short curved shoe horn for a coat pocket or a gym bag: slide it in behind the heel and step in without crushing the back of the shoe.
Printing notes
42.6 cm³
Volume
52.8 g
Est. weight
632
Triangles
Print as it comes, curved outline on the bed.
MAIN PURPOSE: Display rings, watches and bangles
A jewellery tree with posts for every size: rings slide over the slim posts, watches and bangles over the wide one, and loose earrings drop into the tray.
Printing notes
113.7 cm³
Volume
141.0 g
Est. weight
4,932
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Store perfume sample vials
Keeps 1-2 ml perfume and aftershave sample vials upright in eight cells, so you can try them in turn; the telescoping lid keeps the light out.
Printing notes
76.7 cm³
Volume
95.2 g
Est. weight
5,052
Triangles
Prints as shown on its floor, no supports. The lid prints as a separate part, top down.