Add a hook to any door without screws
Hangs a dressing gown, a towel or tomorrow's outfit on any door up to 40 mm thick, with no screws: the top hooks over the door and the hook sits low on the back.
Print lying flat so the layers run along the hook.
Filament: at most about 37.0 g of PLA printed solid (roughly $0.74 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The over-the-door hook model measures 49 × 112 × 20 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
Usually not. Print lying flat so the layers run along the hook.
At most about 37.0 g of PLA (29.8 cm³ printed solid), roughly $0.74 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the over-the-door hook model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.