Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Stacked-ring makeup brush pot
By Krypto
Complexity
Medium
Makeup & beauty
0
Stacked-ring makeup brush pot
MAIN PURPOSE: Stand makeup brushes upright on the vanity
A round brush pot with raised rings stacked up the wall, like a pile of rings.
Printing notes
106.4 cm³
Volume
132.0 g
Est. weight
34,700
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Hair-colour foil dispenser
By Krypto
Complexity
Simple
Bedroom & bathroom Makeup & beauty
0
Hair-colour foil dispenser
MAIN PURPOSE: Pull pre-cut colouring foils one at a time at the salon station
A dispenser for hair colourists. A stack of pre-cut foils stands in the box, a deep finger notch in the front lets the next sheet be pinched out with gloved fingers, and the wall-mount keyholes keep it on the trolley instead of sliding into the colour bowl.
Printing notes
24.3 cm³
Volume
30.1 g
Est. weight
1,572
Triangles

Fits 12.7 x 28 cm pop-up foils; screw it to the trolley through the keyholes. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Henna cone stand
By Krypto
Complexity
Advanced
Bedroom & bathroom Makeup & beauty
0
Henna cone stand
MAIN PURPOSE: Stand henna cones tip-down so they don't dry out or leak
A stand for mehndi artists. Eight henna cones stand tip-down in a flower-shaped vase, so the paste flows to the tip ready for the next line. A damp cloth in the chamber below stops the tips drying, and paste can't leak onto the table.
Printing notes
116.4 cm³
Volume
144.4 g
Est. weight
3,148
Triangles

Tips rest in the chamber below; a damp paper towel in the base keeps them fresh. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Fragrance blotter stand
By Krypto
Complexity
Medium
Bedroom & bathroom Makeup & beauty
0
Fragrance blotter stand
MAIN PURPOSE: Stand scent test strips upright while they dry down
A stand for perfume lovers and perfumers: spray seven test strips and stand each in its own slot, then smell how every scent develops over the day without the strips touching each other or the table.
Printing notes
20.5 cm³
Volume
25.4 g
Est. weight
6,376
Triangles

Write the perfume name at the bottom of each strip before you spray. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Terrace Well
By Krypto
Complexity
Simple
Bedroom & bathroom Makeup & beauty
0
Terrace Well
MAIN PURPOSE: Add an open tray to a linked riser display
An open member of the Terrace system: the step outline printed the right way up as a 30 mm tray, so a row of risers can include a well for rings, lip balms or a candle dish. It locks to the steps on either side with the same dovetails.
Printing notes
43.4 cm³
Volume
53.8 g
Est. weight
996
Triangles

Print upright, open side up. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Pocket Moon
By Krypto
Complexity
Multi-part assembly
Bedroom & bathroom Makeup & beauty
0
Pocket Moon
MAIN PURPOSE: Carry a mirror safely in a screw-lid compact
A round compact mirror case with a moon-and-star lid. Glue a 50 mm craft mirror into the base, screw the lid on and it rides safely in a handbag; the lid carries a name in relief and a star beside it. A personal gift that costs very little to make beautifully.
Printing notes
28.6 cm³
Volume
35.5 g
Est. weight
4,880
Triangles

Silk PLA; glue in a 50 mm round mirror with a dot of silicone. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app
Preview of Mascara lid shield
By Krypto
Complexity
Simple
Bedroom & bathroom Makeup & beauty
0
Mascara lid shield
MAIN PURPOSE: Keep mascara off the eyelid
Hold the curved card along the lash line with the thumb tab while you apply mascara: stray strokes land on the shield, not on the eyelid or under the eye, so there is nothing to wipe off afterwards.
Printing notes
2.2 cm³
Volume
2.7 g
Est. weight
368
Triangles

Print flat in PETG; wipe clean.

AR view Open in app
Preview of Upside-down makeup brush drying rack
By Krypto
Complexity
Advanced
Bedroom & bathroom Makeup & beauty
0
Upside-down makeup brush drying rack
MAIN PURPOSE: Dry makeup brushes bristles down
Push each washed brush handle-first up through the hole where it wedges: the bristles hang down and dry, so water never runs into the ferrule and loosens the glue. Eight holes from 6 to 13 mm cover slim liners to fat powder brushes.
Printing notes
79.9 cm³
Volume
99.0 g
Est. weight
2,328
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Powder pan re-pressing tamper
By Krypto
Complexity
Advanced
Bedroom & bathroom Makeup & beauty
0
Powder pan re-pressing tamper
MAIN PURPOSE: Repair broken pressed powder makeup
Crush a broken eyeshadow or blusher, wet it with a few drops of surgical spirit, cover with kitchen paper and press with this 25 mm tamper: the powder sets into a smooth, solid cake again instead of being thrown away.
Printing notes
8.2 cm³
Volume
10.2 g
Est. weight
2,200
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Fingertip rest for drying nail polish
By Krypto
Complexity
Advanced
Bedroom & bathroom Makeup & beauty
0
Fingertip rest for drying nail polish
MAIN PURPOSE: Let painted nails dry without smudges
Rest the palm in the tray and the fingertips on the five posts: the pads of the fingers take the weight and the wet nails float in the air, so a fresh manicure dries without a single smudge.
Printing notes
57.6 cm³
Volume
71.5 g
Est. weight
5,204
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan