Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Hardboard drawer divider clips
By Krypto
Complexity
Simple
Others Drawer & cabinet organisers
0
Hardboard drawer divider clips
MAIN PURPOSE: Fit custom dividers in any drawer
Stick a pair of clips facing each other on opposite drawer sides and drop in a strip of 3 mm hardboard, plywood or an old chopping mat: dividers exactly where you want them in any drawer width, and moved in seconds.
Printing notes
6.1 cm³
Volume
7.5 g
Est. weight
972
Triangles

Print in pairs; fix with double-sided tape. Prints as shown on its outline, no supports.

AR view Open in app
Preview of False-floor drawer insert
By Krypto
Complexity
Simple
Others Drawer & cabinet organisers
0
False-floor drawer insert
MAIN PURPOSE: Hide valuables under a false drawer floor
Drops into a drawer and hides a shallow compartment: slide a sheet of 3 mm hardboard, cut to size, along the grooves in the side walls and over the lowered front wall, put the socks back on top, and passports or cash lie unseen underneath.
Printing notes
74.6 cm³
Volume
92.5 g
Est. weight
180
Triangles

Add a sheet of 3 mm hardboard cut to size. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Hanging-file rail clips
By Krypto
Complexity
Simple (set)
Others Drawer & cabinet organisers
0
Hanging-file rail clips
MAIN PURPOSE: Hang suspension files in an ordinary drawer
Turns a deep drawer into a filing drawer: hook a clip over each corner of the drawer sides (up to 19 mm thick), lay a 10 mm dowel in the cradles along each side, and standard suspension files hang from the dowels.
Printing notes
12.3 cm³
Volume
15.2 g
Est. weight
1,064
Triangles

Print four, profile on the bed. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Bin liner roll dispenser
By Krypto
Complexity
Multi-part assembly
Others Drawer & cabinet organisers
0
Bin liner roll dispenser
MAIN PURPOSE: Dispense bin liners one at a time
Screw it inside the bin cupboard door, drop in a roll of bin liners and pull the first through the slot: each bag tears off with the next one waiting in the slot, so the roll never unravels in the back of a drawer.
Printing notes
137.5 cm³
Volume
170.5 g
Est. weight
6,072
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Drawer pull-out stop button
By Krypto
Complexity
Simple
Others Drawer & cabinet organisers
0
Drawer pull-out stop button
MAIN PURPOSE: Stop a drawer from falling out
Screw it loosely to the back of a drawer, standing up: it catches the cabinet's top rail, so the drawer cannot be pulled right out and spill onto the floor. Turn it flat and the drawer comes out for cleaning. Ideal for old drawers without runners.
Printing notes
6.4 cm³
Volume
8.0 g
Est. weight
332
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Tip-out sink front tray
By Krypto
Complexity
Simple
Others Drawer & cabinet organisers
0
Tip-out sink front tray
MAIN PURPOSE: Use the dummy panel in front of a sink
Screw it to the back of the dummy panel in front of a kitchen sink, add a pair of tip-out hinges, and the dead strip becomes a slim tray for sponges, scourers and a brush. The lower inner wall makes them easy to grab as the panel tilts.
Printing notes
17.5 cm³
Volume
21.7 g
Est. weight
1,320
Triangles

Add a pair of tip-out tray hinges. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Christmas ornament keeper
By Krypto
Complexity
Multi-part assembly
Others Drawer & cabinet organisers
0
Christmas ornament keeper
MAIN PURPOSE: Store glass baubles safely between years
Twelve deep cells that keep glass baubles apart from one year to the next, under a telescoping lid with ORNAMENTS on top.
Printing notes
597.1 cm³
Volume
740.3 g
Est. weight
9,720
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Nightstand catch-all with lid
By Krypto
Complexity
Multi-part assembly
Bedroom & bathroom Drawer & cabinet organisers
0
Nightstand catch-all with lid
MAIN PURPOSE: Hold small bedside items under a lid
Four cells with a telescoping lid for the nightstand.
Printing notes
168.3 cm³
Volume
208.7 g
Est. weight
5,028
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Vanity drawer divider pro
By Krypto
Complexity
Medium
Bedroom & bathroom Drawer & cabinet organisers
0
Vanity drawer divider pro
MAIN PURPOSE: Divide a vanity drawer into cells
Six rounded cells for a vanity drawer.
Printing notes
190.2 cm³
Volume
235.8 g
Est. weight
1,028
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of TV remote caddy four-slot
By Krypto
Complexity
Medium
Others Drawer & cabinet organisers
0
TV remote caddy four-slot
MAIN PURPOSE: Hold four TV remotes upright
Four slots for TV remotes with soft rims.
Printing notes
93.0 cm³
Volume
115.4 g
Est. weight
2,916
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan