Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Drafting eraser shield
By Krypto
Complexity
Medium
Desk & office Office tools
0
Drafting eraser shield
MAIN PURPOSE: Erase tiny areas without smudging
A thin drafting shield with eight openings, from fine and wide slots to dots, a square and a pill, so you can erase one line or a tiny area without touching the drawing around it.
Printing notes
5.1 cm³
Volume
6.3 g
Est. weight
3,880
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Model kit sprue and parts tray
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Model kit sprue and parts tray
MAIN PURPOSE: Organise sprues and cut-off model parts
A build tray for plastic model kits: sprue frames stand upright in four slots on the left, and the right side has bays for cut-off parts so nothing tiny goes missing before it is glued.
Printing notes
128.6 cm³
Volume
159.4 g
Est. weight
1,064
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Mini roller paint tray
By Krypto
Complexity
Medium
Workshop Finishing & painting
0
Mini roller paint tray
MAIN PURPOSE: Load mini rollers with paint
A tray for 10 cm mini rollers: paint goes in the deep front well behind a low dam, and you roll off the excess on the ribbed floor behind it.
Printing notes
79.6 cm³
Volume
98.7 g
Est. weight
11,252
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Paint drying dust cover
By Krypto
Complexity
Medium
Workshop Finishing & painting
0
Paint drying dust cover
MAIN PURPOSE: Keep dust off drying painted miniatures
Lower it over freshly painted miniatures or parts: dust stays off while the slotted ends let the solvents escape. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
117.3 cm³
Volume
145.4 g
Est. weight
2,832
Triangles

Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Airbrush cleaning pot
By Krypto
Complexity
Medium
Workshop Finishing & painting
0
Airbrush cleaning pot
MAIN PURPOSE: Catch airbrush cleaner spray safely
Spray cleaner through the airbrush into the pot instead of the air: push the nozzle into the port in the top, and two small vents let air out while a sponge under the top catches the mist.
Printing notes
92.1 cm³
Volume
114.2 g
Est. weight
2,048
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Component lead bending gauge
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Component lead bending gauge
MAIN PURPOSE: Bend component leads to breadboard spacing
Bend resistor and diode leads to fit exactly 4 to 9 breadboard holes apart: lay the part across the step with the right number and fold both leads down over its edges.
Printing notes
10.2 cm³
Volume
12.6 g
Est. weight
6,948
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Toilet brush holder
By Krypto
Complexity
Medium
Bedroom & bathroom Bath & body care
0
Toilet brush holder
MAIN PURPOSE: Hold a toilet brush and catch drips
A tall, square toilet brush holder with slotted upper walls so the brush dries instead of sitting damp, and a solid lower half that holds the drips.
Printing notes
43.8 cm³
Volume
54.3 g
Est. weight
5,072
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Scarf hanger
By Krypto
Complexity
Medium
Bedroom & bathroom Wardrobe & dressing
0
Scarf hanger
MAIN PURPOSE: Hang several scarves from one hook
Hang up to seven scarves, shawls or ties from one hook on the rail: each loops through its own hole, so they stay visible and uncreased.
Printing notes
72.7 cm³
Volume
90.2 g
Est. weight
1,528
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Slug beer trap
By Krypto
Complexity
Medium
Others Garden & plants
0
Slug beer trap
MAIN PURPOSE: Trap slugs and snails with beer
A beer trap for slugs and snails: sink it so the four entrance windows sit just above the soil, half-fill it with beer, and the lift-off roof keeps the rain from diluting it.
Printing notes
63.2 cm³
Volume
78.4 g
Est. weight
10,916
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

AR view Open in app
Preview of Hyacinth bulb forcing vase
By Krypto
Complexity
Medium
Others Garden & plants
0
Hyacinth bulb forcing vase
MAIN PURPOSE: Force hyacinth bulbs indoors in water
Grow a hyacinth indoors over winter: the bulb sits in the top cup just clear of the water and its roots grow down through the hole into the vase below. Print the vase watertight, or stand a glass inside it.
Printing notes
124.8 cm³
Volume
154.8 g
Est. weight
1,856
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan