Showcase
Models Showcase
Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category
MAIN PURPOSE: Store small parts in a Gridfinity bin
A long Gridfinity bin with a scooped front edge for small parts and a label slot.
Printing notes
35.2 cm³
Volume
43.6 g
Est. weight
2,254
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Sweep sawdust off the workbench
A bench dustpan with an open front to sweep into, filleted inner corners and a hanging slot in the back.
Printing notes
112.5 cm³
Volume
139.6 g
Est. weight
1,260
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Store spare car blade fuses
Twelve small cells for blade fuses by rating, with a flat lid and ring pull for the glovebox.
Printing notes
96.6 cm³
Volume
119.8 g
Est. weight
3,408
Triangles
Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
MAIN PURPOSE: Catch slurry under a whetstone
The stone sits inside an inner wall while water and slurry run off into the channel around it, on small feet.
Printing notes
95.4 cm³
Volume
118.3 g
Est. weight
2,352
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Hold desiccant in a filament dry box
A long vented box for silica gel beads that sits in a filament dry box, with honeycomb vents all round.
Printing notes
68.5 cm³
Volume
84.9 g
Est. weight
6,400
Triangles
Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
MAIN PURPOSE: Enclose a credit-card sized computer
An enclosure for a credit-card sized computer with port openings, a slotted vent panel and a flat lid.
Printing notes
55.1 cm³
Volume
68.3 g
Est. weight
12,668
Triangles
Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
MAIN PURPOSE: Keep screws in disassembly order
Eight numbered cells that keep screws in the order they came out while you repair a phone or laptop.
Printing notes
47.1 cm³
Volume
58.4 g
Est. weight
9,316
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Hang a cordless drill on the wall
A wall holster that holds a cordless drill chuck-down through a hole in its floor, battery up and ready to grab.
Printing notes
33.0 cm³
Volume
40.9 g
Est. weight
1,664
Triangles
Prints as shown on its floor, no supports.
MAIN PURPOSE: Catch oil drips under machines
A drop-shaped drip tray that sits under a machine, bike or oil can, with OIL engraved in the floor.
Printing notes
91.3 cm³
Volume
113.2 g
Est. weight
1,668
Triangles
Prints as shown on its outline, no supports.
MAIN PURPOSE: Trap grit below your wash mitt
A honeycomb-perforated disc on feet that sits in the bottom of a wash bucket and keeps grit away from your mitt.
Printing notes
180.4 cm³
Volume
223.7 g
Est. weight
5,516
Triangles
Prints flat as a plate, no supports.