Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Drill and dowel size gauge
By Krypto
Complexity
Advanced
Workshop Tools & jigs
0
Drill and dowel size gauge
MAIN PURPOSE: Identify drill bit and dowel sizes
A flat gauge with eight holes from 3 to 14 mm and the size engraved under each, for identifying drill bits, dowels and bolts.
Printing notes
50.9 cm³
Volume
63.1 g
Est. weight
11,256
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Speed square fitted tray
By Krypto
Complexity
Simple
Workshop Tools & jigs
0
Speed square fitted tray
MAIN PURPOSE: Store a rafter speed square
A tray with a recess shaped exactly like a 7-inch rafter square, so it always goes back in the same place.
Printing notes
439.7 cm³
Volume
545.2 g
Est. weight
1,224
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Multimeter caddy with probe channel
By Krypto
Complexity
Simple
Workshop Electronics & robotics
0
Multimeter caddy with probe channel
MAIN PURPOSE: Hold a multimeter and its probes
A deep fitted caddy for a multimeter with a long channel beside it for the test probes and leads.
Printing notes
313.4 cm³
Volume
388.7 g
Est. weight
1,772
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Wire stripper drawer shadow board
By Krypto
Complexity
Simple
Workshop Tools & jigs
0
Wire stripper drawer shadow board
MAIN PURPOSE: Store wire strippers in a drawer
A thin shadow board for a tool drawer with a recess shaped like a pair of wire strippers.
Printing notes
101.2 cm³
Volume
125.5 g
Est. weight
748
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Shop rag dispenser
By Krypto
Complexity
Multi-part assembly
Workshop Workshop storage
0
Shop rag dispenser
MAIN PURPOSE: Dispense shop rags from a wall box
A wall-mounted rag box: stuff rags in at the top and pull them out through the round opening, with RAGS on the front.
Printing notes
421.5 cm³
Volume
522.6 g
Est. weight
7,620
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. The lid prints as a separate part, top down.

AR view Open in app
Preview of Solder spool dispenser
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Solder spool dispenser
MAIN PURPOSE: Feed solder wire from its spool
A round canister the solder spool turns inside, feeding the wire out through a small hole in the fitted top, on round feet.
Printing notes
63.1 cm³
Volume
78.3 g
Est. weight
1,720
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Filament swatch slot rack
By Krypto
Complexity
Advanced
Workshop Maker & 3D printing
0
Filament swatch slot rack
MAIN PURPOSE: Sort filament colour swatches upright
Nine slots that keep 3D printing filament swatches upright and easy to flick through, with a label slot.
Printing notes
80.2 cm³
Volume
99.5 g
Est. weight
3,048
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Bike torque wrench case
By Krypto
Complexity
Multi-part assembly
Workshop Car & bike
0
Bike torque wrench case
MAIN PURPOSE: Store a compact bicycle torque wrench
A long fitted case for a compact bicycle torque wrench, with a telescoping lid shown beside it.
Printing notes
374.7 cm³
Volume
464.6 g
Est. weight
5,620
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Ratchet and socket fitted tray
By Krypto
Complexity
Simple
Workshop Tools & jigs
0
Ratchet and socket fitted tray
MAIN PURPOSE: Organise a ratchet and sockets
A shadow tray with a ratchet-shaped recess and a row of four sockets in rising sizes.
Printing notes
272.0 cm³
Volume
337.3 g
Est. weight
2,716
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Wall spray bottle caddy
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Wall spray bottle caddy
MAIN PURPOSE: Hang spray bottles trigger-ready on the wall
Three bays for spray bottles with a low front so the triggers are easy to grab, mounted with keyholes.
Printing notes
141.2 cm³
Volume
175.1 g
Est. weight
1,520
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan