Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Respirator cartridge keeper
By Krypto
Complexity
Multi-part assembly
Workshop Workshop storage
0
Respirator cartridge keeper
MAIN PURPOSE: Seal a respirator away from dust and fumes
Organic vapour cartridges keep soaking up fumes and dust whenever they sit in open air. Seal the half mask and its cartridges in this snug box between jobs and they last many times longer, and the face seal stays clean and undistorted.
Printing notes
114.6 cm³
Volume
142.1 g
Est. weight
10,648
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Coiled bandsaw blade wall rack
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Coiled bandsaw blade wall rack
MAIN PURPOSE: Store coiled bandsaw blades safely
Fold each bandsaw blade into its three loops and stand the coil in one of the five lanes: the teeth sit inside the deep walls, out of reach of hands and away from other blades, and the low front lets you lift the right one out. Hangs on two keyholes.
Printing notes
39.3 cm³
Volume
48.7 g
Est. weight
660
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Chuck key cord clip
By Krypto
Complexity
Simple
Workshop Workshop storage
0
Chuck key cord clip
MAIN PURPOSE: Keep a chuck key on its machine
Snaps onto the power cord of a drill press or lathe and holds the chuck key by its shank beside the plug: you have to take the key out to unplug the machine, and it is always within reach when you need it.
Printing notes
5.0 cm³
Volume
6.2 g
Est. weight
1,448
Triangles

Print in PETG. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Air compressor fittings caddy
By Krypto
Complexity
Advanced
Workshop Workshop storage
0
Air compressor fittings caddy
MAIN PURPOSE: Store compressor couplers, nozzles and tape
Everything for the compressor in one wall caddy: four bays for couplers, plugs, nozzles and the tyre chuck, a round side cup for thread-seal tape, and two keyholes to hang it by.
Printing notes
124.9 cm³
Volume
154.9 g
Est. weight
2,960
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Model kit sprue and parts tray
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Model kit sprue and parts tray
MAIN PURPOSE: Organise sprues and cut-off model parts
A build tray for plastic model kits: sprue frames stand upright in four slots on the left, and the right side has bays for cut-off parts so nothing tiny goes missing before it is glued.
Printing notes
128.6 cm³
Volume
159.4 g
Est. weight
1,064
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Ladder-top tool tray
By Krypto
Complexity
Simple
Workshop Workshop storage
0
Ladder-top tool tray
MAIN PURPOSE: Hold paint and screws on a ladder
Sits on top of a stepladder: one half takes a paint tin or a tub of filler, the other has bays for screws and a pencil, and grip feet stop it sliding off while you work.
Printing notes
178.2 cm³
Volume
221.0 g
Est. weight
2,916
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Hopper-front parts bin
By Krypto
Complexity
Simple
Workshop Workshop storage
0
Hopper-front parts bin
MAIN PURPOSE: Store small parts with easy scoop access
A deep parts bin with a low front, a scooped inner front edge that funnels parts to your fingers, and a label slot.
Printing notes
52.2 cm³
Volume
64.8 g
Est. weight
1,234
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Shop rag dispenser
By Krypto
Complexity
Multi-part assembly
Workshop Workshop storage
0
Shop rag dispenser
MAIN PURPOSE: Dispense shop rags from a wall box
A wall-mounted rag box: stuff rags in at the top and pull them out through the round opening, with RAGS on the front.
Printing notes
421.5 cm³
Volume
522.6 g
Est. weight
7,620
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. The lid prints as a separate part, top down.

AR view Open in app
Preview of Wall spray bottle caddy
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Wall spray bottle caddy
MAIN PURPOSE: Hang spray bottles trigger-ready on the wall
Three bays for spray bottles with a low front so the triggers are easy to grab, mounted with keyholes.
Printing notes
141.2 cm³
Volume
175.1 g
Est. weight
1,520
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Disassembly screw tray with numbered cells
By Krypto
Complexity
Advanced
Workshop Workshop storage
0
Disassembly screw tray with numbered cells
MAIN PURPOSE: Keep screws in disassembly order
Eight numbered cells that keep screws in the order they came out while you repair a phone or laptop.
Printing notes
47.1 cm³
Volume
58.4 g
Est. weight
9,316
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan