Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of DIP chip leg straightener
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
DIP chip leg straightener
MAIN PURPOSE: Straighten DIP chip legs to row spacing
New DIP chips arrive with their legs splayed. Press one legs down into the 0.3 inch channel, or a wide chip into the 0.6 inch channel beside it, and rock it once: both rows bend to the exact row spacing and drop straight into a socket or breadboard.
Printing notes
4.1 cm³
Volume
5.1 g
Est. weight
168
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of 18650 pack-building spacer, 4 x 2
By Krypto
Complexity
Medium (set)
Workshop Electronics & robotics
0
18650 pack-building spacer, 4 x 2
MAIN PURPOSE: Space 18650 cells for building a battery pack
Holds eight 18650 cells upright at a 20 mm pitch with a 1 mm web between them, so a battery pack can be laid out, spot-welded and wrapped with every cell parallel and an air gap for cooling. Print two, one for each end of the pack.
Printing notes
7.0 cm³
Volume
8.7 g
Est. weight
1,996
Triangles

Print two in PETG or ASA. Prints flat as a plate, no supports.

AR view Open in app
Preview of Coiled bandsaw blade wall rack
By Krypto
Complexity
Medium
Workshop Workshop storage
0
Coiled bandsaw blade wall rack
MAIN PURPOSE: Store coiled bandsaw blades safely
Fold each bandsaw blade into its three loops and stand the coil in one of the five lanes: the teeth sit inside the deep walls, out of reach of hands and away from other blades, and the low front lets you lift the right one out. Hangs on two keyholes.
Printing notes
39.3 cm³
Volume
48.7 g
Est. weight
660
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Shop vacuum hose step adapter
By Krypto
Complexity
Medium
Workshop Tools & jigs
0
Shop vacuum hose step adapter
MAIN PURPOSE: Connect a vacuum hose to a tool dust port
Joins a 58 mm vacuum hose to a tool with a smaller 40 mm dust port: one end fits inside the hose, the other over the port, with a step between them. Wrap tape round a loose joint.
Printing notes
27.7 cm³
Volume
34.3 g
Est. weight
1,696
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Epoxy mixing palette
By Krypto
Complexity
Medium
Workshop Finishing & painting
0
Epoxy mixing palette
MAIN PURPOSE: Mix small batches of epoxy and resin
Six shallow round wells for mixing small batches of two-part epoxy or resin pigment; cured epoxy flexes out of the smooth, coved wells.
Printing notes
44.1 cm³
Volume
54.6 g
Est. weight
1,700
Triangles

PETG releases cured epoxy well; PLA does not. Prints as shown on its floor, no supports.

AR view Open in app
Preview of PTFE tube square-cut guide
By Krypto
Complexity
Medium
Workshop Maker & 3D printing
0
PTFE tube square-cut guide
MAIN PURPOSE: Cut PTFE tube square for 3D printers
Cuts 4 mm PTFE tube perfectly square for a leak-free hotend joint: push the tube through the side holes and press a sharp blade straight down through the slot.
Printing notes
5.4 cm³
Volume
6.7 g
Est. weight
1,352
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Shop vacuum crevice nozzle
By Krypto
Complexity
Medium
Workshop Tools & jigs
0
Shop vacuum crevice nozzle
MAIN PURPOSE: Vacuum dust from tight gaps
A long flat nozzle for a 35 mm vacuum hose that reaches sawdust between machines, along fence rails and down the back of the bench.
Printing notes
14.5 cm³
Volume
17.9 g
Est. weight
2,116
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Router table featherboard
By Krypto
Complexity
Medium
Workshop Woodworking
0
Router table featherboard
MAIN PURPOSE: Keep wood pressed against a fence
Holds a workpiece against the router fence or saw fence as it passes: bolt it down through the two slots so the flexible fingers press lightly on the wood.
Printing notes
62.9 cm³
Volume
78.0 g
Est. weight
3,268
Triangles

Print in PETG with 4 walls so the fingers flex without snapping. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Two-wheel robot chassis plate
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
Two-wheel robot chassis plate
MAIN PURPOSE: Build a small hobby robot
A base plate for a small two-wheel robot: the wheels sit in the side slots, a ball caster goes through the front hole, and the four small holes take a microcontroller board, with a cable hole in the middle.
Printing notes
63.2 cm³
Volume
78.4 g
Est. weight
2,960
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of 80 mm fan guard
By Krypto
Complexity
Medium
Workshop Electronics & robotics
0
80 mm fan guard
MAIN PURPOSE: Guard an 80 mm cooling fan
A honeycomb finger guard for an 80 mm cooling fan in a printer, a PC or an electronics box; it bolts on through the four corner holes with the fan's own screws.
Printing notes
11.3 cm³
Volume
14.0 g
Est. weight
3,660
Triangles

Prints flat as a plate, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan