Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Flash gel filter wallet
By Krypto
Complexity
Multi-part assembly
Others Photography & film
0
Flash gel filter wallet
MAIN PURPOSE: Carry flash colour gels flat and sorted
A slim case for a stack of 75 mm flash gels: colour correction gels on one side, effect colours on the other, with a telescoping lid that keeps them flat and scratch-free in the bag.
Printing notes
32.3 cm³
Volume
40.1 g
Est. weight
8,924
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Mini clapperboard slate
By Krypto
Complexity
Medium
Others Photography & film
0
Mini clapperboard slate
MAIN PURPOSE: Label and sync video takes
A pocket slate for video shoots and vlogs: write the scene, take and roll in dry-wipe marker beside the engraved labels, hold it up and clap the raised bar for a sync point.
Printing notes
77.5 cm³
Volume
96.1 g
Est. weight
6,496
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Wireless lav mic kit case
By Krypto
Complexity
Multi-part assembly
Others Photography & film
0
Wireless lav mic kit case
MAIN PURPOSE: Keep a wireless microphone kit together
A case for a two-person wireless lavalier kit: two bays for the transmitters, one for the receiver, a side lane for the lav capsules and foam windshields, all under a telescoping lid.
Printing notes
195.3 cm³
Volume
242.2 g
Est. weight
6,136
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Travel gaffer tape spool
By Krypto
Complexity
Advanced
Others Photography & film
0
Travel gaffer tape spool
MAIN PURPOSE: Carry a small amount of gaffer tape
Wind two or three metres of gaffer tape onto this mini spool instead of carrying a whole roll; the flanges keep the tape neat and the centre hole lets it spin on a pen while you pull.
Printing notes
22.7 cm³
Volume
28.1 g
Est. weight
1,504
Triangles

Prints flat as a plate, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Negative strip archive box
By Krypto
Complexity
Multi-part assembly
Others Photography & film
0
Negative strip archive box
MAIN PURPOSE: Store sleeved 35 mm negative strips flat
Archive 35 mm negatives in their sleeves: strips of six frames lie flat in the long box, the telescoping lid keeps out light and dust, and the label slot takes the year or job.
Printing notes
102.7 cm³
Volume
127.3 g
Est. weight
4,980
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Five-inch field monitor sun hood
By Krypto
Complexity
Simple
Others Photography & film
0
Five-inch field monitor sun hood
MAIN PURPOSE: Shade a camera field monitor in daylight
Slides over a 5-inch camera monitor like a tunnel so you can see the picture in bright sun; strap it on through the side slots with a hook-and-loop strip. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
33.7 cm³
Volume
41.8 g
Est. weight
2,288
Triangles

Print floor-down (the floor is the hood's roof), no supports. Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Phone film negative scanner box
By Krypto
Complexity
Medium
Others Photography & film
0
Phone film negative scanner box
MAIN PURPOSE: Scan 35 mm negatives with a phone and a light pad
Digitise old negatives with a phone: stand the box on a tablet showing a white screen, slide the film strip through the side slots over the window, and photograph each frame through the top opening.
Printing notes
47.2 cm³
Volume
58.5 g
Est. weight
3,628
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Cello endpin stopper
By Krypto
Complexity
Medium
Others Music & audio
0
Cello endpin stopper
MAIN PURPOSE: Keep a cello or bass endpin from slipping
Stops a cello or double bass endpin sliding on a wooden or tiled floor: the pin bites into the dotted floor, the grip feet hold the stopper still, and the strap tab ties round a chair leg so it can't creep away.
Printing notes
27.6 cm³
Volume
34.2 g
Est. weight
24,000
Triangles

Print in TPU for the best grip, or PETG with felt pads. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Brass mouthpiece stand
By Krypto
Complexity
Medium
Others Music & audio
0
Brass mouthpiece stand
MAIN PURPOSE: Display and store brass mouthpieces
A stand for three trumpet or cornet mouthpieces: each shank drops into a hole so the cups sit level on the deck, clean and ready to swap between pieces.
Printing notes
26.7 cm³
Volume
33.1 g
Est. weight
7,568
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Ukulele wall hanger
By Krypto
Complexity
Advanced
Others Music & audio
0
Ukulele wall hanger
MAIN PURPOSE: Wall-mount a ukulele
Hangs a ukulele by its headstock: screw the plate to the wall and the neck rests between the two posts with the head behind them. Print it lying flat; once on the wall the posts point straight out.
Printing notes
46.9 cm³
Volume
58.2 g
Est. weight
1,700
Triangles

Print flat in PETG with 4 or more perimeters; screw into a stud or a proper wall plug.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan