Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Jacaranda
By Krypto
Complexity
Simple (set)
Others Music & audio
0
Jacaranda
MAIN PURPOSE: Play a pair of seed pod castanets
Castanets from a seed pod. Jacaranda pods are round woody shells that children clack together; print two of these cupped valves, tie them through the stalk holes with cord so the rims face each other, loop the cord over your thumb and snap them with your fingers.
Printing notes
11.4 cm³
Volume
14.1 g
Est. weight
1,404
Triangles

PLA or PETG. Print two. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Tine Box
By Krypto
Complexity
Advanced
Others Music & audio
0
Tine Box
MAIN PURPOSE: Build a kalimba resonator for a tine kit
The resonator body of a 17-key kalimba. A 140 x 84 mm hollow box with a round sound hole in the soundboard, two wah holes in the back for your fingers and a raised rest bar for a standard tine kit, braced inside so the top stays flat. Add a tine and bridge kit and play.
Printing notes
63.8 cm³
Volume
79.1 g
Est. weight
756
Triangles

PLA at 3 walls; braces support the soundboard. Tine kit not included. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Wax-tuned pentatonic pan flute
By Krypto
Complexity
Advanced
Others Music & audio
0
Wax-tuned pentatonic pan flute
MAIN PURPOSE: Play and tune a pentatonic pan flute
Eight closed pipes 100 mm deep, labelled A5 to D7: tune each one with a tuner app by dropping in beeswax or Blu Tack until the note is true, just as Andean makers tune with wax. The rounded rims are kind to the lips and every pipe is re-tunable.
Printing notes
24.0 cm³
Volume
29.8 g
Est. weight
15,696
Triangles

PETG so the pipes stay airtight; 3 walls. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Guitar strap lock washers
By Krypto
Complexity
Simple (set)
Others Music & audio
0
Guitar strap lock washers
MAIN PURPOSE: Stop a guitar strap slipping off its buttons
Push the round hole over the strap button outside the strap and slide it sideways into the narrow slot: the button head is trapped and the strap cannot pull off, so the guitar never drops mid-song. A cheap fix for every strap and every guitar.
Printing notes
1.9 cm³
Volume
2.4 g
Est. weight
970
Triangles

TPU 95A grips best. Print two. Prints flat as a plate, no supports.

AR view Open in app
Preview of Studio monitor tilt wedges
By Krypto
Complexity
Simple (set)
Others Music & audio
0
Studio monitor tilt wedges
MAIN PURPOSE: Aim and decouple desktop studio monitors
Four TPU wedges under a desktop speaker tilt the tweeter up about 4 degrees towards your ears and decouple the cabinet from the desk, so the bass stops booming through the furniture. The lip at the low end keeps the speaker from sliding.
Printing notes
32.7 cm³
Volume
40.6 g
Est. weight
480
Triangles

TPU 95A, 15 % gyroid infill. Print four. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Music stand page clip
By Krypto
Complexity
Simple (set)
Others Music & audio
0
Music stand page clip
MAIN PURPOSE: Hold sheet music open on a stand outdoors
Hook the clip over the ledge of a music stand and let the springy arm press on the open pages: the music stays put in a draught or outdoors, and the arm flexes aside with one finger for a quick page turn.
Printing notes
5.6 cm³
Volume
7.0 g
Est. weight
528
Triangles

PETG for spring; print two. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Guitar soundhole humidifier pod
By Krypto
Complexity
Medium
Others Music & audio
0
Guitar soundhole humidifier pod
MAIN PURPOSE: Humidify an acoustic guitar from inside
Fill the slotted pod with a damp sponge and hang it in the sound hole from the 120 mm bar, slid under the strings: the guitar breathes moisture from inside, where it matters, so the top does not crack and the frets do not stick out in dry winter air.
Printing notes
5.1 cm³
Volume
6.3 g
Est. weight
10,204
Triangles

PETG. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Drum practice pad base
By Krypto
Complexity
Advanced
Others Music & audio
0
Drum practice pad base
MAIN PURPOSE: Practise drumming quietly
Glue a 6 mm gum-rubber or neoprene disc into the 4 mm recess and you have a quiet, bouncy practice pad: the eight-spoke body stays rigid under rimshots and the grip feet hold it on a table, a knee or a snare stand basket.
Printing notes
404.2 cm³
Volume
501.2 g
Est. weight
2,552
Triangles

PLA or PETG; add a 200 mm gum-rubber disc. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Elastic hair-tie guitar capo
By Krypto
Complexity
Simple
Others Music & audio
0
Elastic hair-tie guitar capo
MAIN PURPOSE: Make a spare capo from a hair tie
Press the padded bar across the frets and loop a hair tie from one end notch, under the neck, to the other: a capo that weighs nothing, fits any neck width up to 56 mm and costs pennies, ideal as a spare in every gig bag.
Printing notes
6.9 cm³
Volume
8.6 g
Est. weight
440
Triangles

PETG; add a strip of bike inner tube as the pad. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Cello endpin stopper
By Krypto
Complexity
Medium
Others Music & audio
0
Cello endpin stopper
MAIN PURPOSE: Keep a cello or bass endpin from slipping
Stops a cello or double bass endpin sliding on a wooden or tiled floor: the pin bites into the dotted floor, the grip feet hold the stopper still, and the strap tab ties round a chair leg so it can't creep away.
Printing notes
27.6 cm³
Volume
34.2 g
Est. weight
24,000
Triangles

Print in TPU for the best grip, or PETG with felt pads. Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan