Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Signature and date writing guide
By Krypto
Complexity
Medium
Others Accessibility & daily living
0
Signature and date writing guide
MAIN PURPOSE: Sign forms in the right place with low vision
Lay the matt card over a form and sign inside the window: the edges stop the pen drifting off the line, a raised dot marks where the signature starts and a second window takes the date. Print it in black so the slot stands out against white paper.
Printing notes
17.8 cm³
Volume
22.1 g
Est. weight
8,224
Triangles

Matt black filament gives the best contrast. Prints flat as a plate, no supports.

AR view Open in app
Preview of TV remote button simplifier sleeve
By Krypto
Complexity
Medium
Others Accessibility & daily living
0
TV remote button simplifier sleeve
MAIN PURPOSE: Hide every remote button except the essentials
The remote slides into the sleeve and only three windows stay open: power, volume and channel. Move the windows in the editor to sit over your own buttons; everything that confuses (inputs, menus, settings) is covered, and the infrared end sticks out.
Printing notes
31.3 cm³
Volume
38.8 g
Est. weight
5,448
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Blister pack tablet popper with catch cup
By Krypto
Complexity
Medium
Others Health & medicine
0
Blister pack tablet popper with catch cup
MAIN PURPOSE: Pop tablets from blister packs without losing them
Lay a blister bubble over the 15 mm hole and press: the tablet drops into the cup below instead of skittering onto the floor, and pours back out through the same hole into your palm. The cup gives the foil a firm, flat backing.
Printing notes
14.9 cm³
Volume
18.5 g
Est. weight
4,532
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Eye drop aiming guide
By Krypto
Complexity
Medium
Others Health & medicine
0
Eye drop aiming guide
MAIN PURPOSE: Put in eye drops accurately
Push the dropper bottle nozzle-first into the collar and rest the soft-edged eyecup round the eye: the nozzle sits centred above the eye at a fixed distance, so each drop lands where it should and the tip never touches the eye.
Printing notes
9.3 cm³
Volume
11.6 g
Est. weight
1,696
Triangles

Fits bottles up to 24 mm across. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Travel bottle decanting funnel
By Krypto
Complexity
Medium
Others Travel & everyday carry
0
Travel bottle decanting funnel
MAIN PURPOSE: Decant toiletries into travel bottles cleanly
The 13 mm spout fits the neck of a 100 ml travel bottle and the 60 mm cup catches shampoo or sun cream squeezed from the big bottle, so decanting for a trip stops being a sticky mess on the sink edge.
Printing notes
17.2 cm³
Volume
21.4 g
Est. weight
1,528
Triangles

Print upside down, cup rim on the bed; the floor bridges 56 mm. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Universal flat travel sink plug
By Krypto
Complexity
Medium
Others Travel & everyday carry
0
Universal flat travel sink plug
MAIN PURPOSE: Plug any hotel basin or bath drain
Hotel and hostel basins often have no plug: lay this 72 mm TPU disc over any drain up to 60 mm and the water pressure seals it. Lift it by the centre knob; it packs flat in the wash bag.
Printing notes
11.6 cm³
Volume
14.4 g
Est. weight
840
Triangles

Print in TPU 95A. Prints flat as a plate, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Airport liquids bag frame
By Krypto
Complexity
Medium
Others Travel & everyday carry
0
Airport liquids bag frame
MAIN PURPOSE: Keep travel liquids upright in the security bag
A thin-walled frame that sits inside the clear 1-litre liquids bag: four cells keep the 100 ml bottles upright and in a row, the bag keeps its shape in the case, and the whole set lifts out into the security tray in one go.
Printing notes
38.9 cm³
Volume
48.2 g
Est. weight
3,616
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Bottle neck carry loop
By Krypto
Complexity
Medium
Others Travel & everyday carry
0
Bottle neck carry loop
MAIN PURPOSE: Clip any drinks bottle to a bag
Unscrew the cap, drop the ring over the threads onto the neck collar of any 28 mm bottle and screw the cap back: the tab takes a carabiner, so a plain shop bottle clips to a bag or a belt loop.
Printing notes
5.4 cm³
Volume
6.7 g
Est. weight
616
Triangles

Print flat in PETG.

AR view Open in app
Preview of Skateboard bearing press with depth flange
By Krypto
Complexity
Medium
Others Sport & fitness
0
Skateboard bearing press with depth flange
MAIN PURPOSE: Press skate bearings into wheels squarely
Slide it onto the truck axle over the second bearing and tighten the axle nut: the ring pushes only on the outer race, and when the 40 mm flange meets the wheel the bearing is exactly flush. No hammer, no skewed bearings, no cracked shields.
Printing notes
5.4 cm³
Volume
6.7 g
Est. weight
1,176
Triangles

PETG, 100 % infill. Prints flat as a plate, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Forearm wrist roller tube
By Krypto
Complexity
Medium
Others Sport & fitness
0
Forearm wrist roller tube
MAIN PURPOSE: Train forearms and grip with a rolled weight
Tie a cord through the middle hole, hang a weight plate on the other end and roll it up and down with straight arms: the square 34 mm tube with rounded corners and textured sides works the forearms and grip far harder than any squeeze ball.
Printing notes
11.9 cm³
Volume
14.7 g
Est. weight
3,912
Triangles

PETG; print upright with 4 walls. Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan