Models Showcase: free 3D-printable organizers

By Krypto

Complexity

Multi-part assembly

Kitchen Food storage

0

MAIN PURPOSE: Carry a banana in a curved case so it never bruises in a bag

A banana goes into a bag perfect and comes out brown and squashed. This case is shaped like the banana itself, with a curved body and a slip-on lid, so it rides in a backpack or lunchbox without a single bruise. Three small vents in the floor let it breathe. BANANA is raised on the lid, in case anyone was wondering.

Printing notes

88.9 cm³

Volume

110.2 g

Est. weight

4,872

Triangles

Fits most medium bananas. Print in yellow; PETG for the lunchbox. Prints as shown on its outline, no supports. The lid prints as a separate part, top down.

AR view Open in app

By Krypto

Complexity

Advanced

Kitchen Coffee & tea

0

Tip-jar war

MAIN PURPOSE: Let customers vote with their tips between two rival answers

Baristas know a tip jar that asks a question fills faster. Two chambers sit side by side under one slotted top, with CATS on one side and DOGS on the other, and windows down the front show which pile is winning. Customers vote with every coin, and the rivalry keeps them coming back. Stick new labels on for tea or coffee, summer or winter, pineapple on pizza or not.

Printing notes

157.5 cm³

Volume

195.3 g

Est. weight

14,260

Triangles

Print the body and slotted top in clear PETG so the piles show. Swap the labels with paper stickers week by week. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging. Stacked parts are fused into one print.

AR view Open in app

Preview of Scrap-regrow windowsill station

By Krypto

Complexity

Advanced

Kitchen Sustainable living

0

Scrap-regrow windowsill station

MAIN PURPOSE: Regrow lettuce, celery, spring onions and carrot tops from kitchen scraps

The root ends you throw away will grow again. Stand a lettuce or bok choy stump in the wide dish, a celery base in the shallow one, the white roots of spring onions upright in the tall tube and carrot tops in the small cup, each in a little water. Within days new leaves push up from the middle: spring onions can be cut again in a week, celery grows a new heart and carrot tops sprout feathery greens for pesto. Each well is labelled in its floor.

Printing notes

110.4 cm³

Volume

136.9 g

Est. weight

13,256

Triangles

PETG. Use 1-2 cm of water and change it every two days; keep it on a bright windowsill. Prints as shown on its floor, no supports.

AR view Open in app

Preview of Round two-tier screw-together stand

By Krypto

Complexity

Medium

Kitchen Serving & table

0

Round two-tier screw-together stand

MAIN PURPOSE: Serve sweets, fruit or trinkets on two round tiers that screw together

A two-tier stand of round trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.

Printing notes

141.4 cm³

Volume

175.4 g

Est. weight

6,596

Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app

By Krypto

Complexity

Simple

Kitchen Serving & table

0

Round pedestal tray

MAIN PURPOSE: Raise a round tray on a single pedestal for display or serving

A 150 mm round tray lifted 45 mm off the table on a single round pedestal with a wide foot, like a small cake stand. The pedestal pushes into the tray on a press-fit peg, so both parts print flat without supports.

Printing notes

85.8 cm³

Volume

106.3 g

Est. weight

1,232

Triangles

Both parts print flat with no supports. Push the pedestal peg up into the hole in the tray; a drop of glue makes it permanent. Prints as shown on its floor, no supports.

AR view Open in app

Preview of Square two-tier screw-together stand

By Krypto

Complexity

Medium

Kitchen Serving & table

0

Square two-tier screw-together stand

MAIN PURPOSE: Serve sweets, fruit or trinkets on two square tiers that screw together

A two-tier stand of square, round-cornered trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single square pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.

Printing notes

128.6 cm³

Volume

159.5 g

Est. weight

6,436

Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app

By Krypto

Complexity

Simple

Kitchen Serving & table

0

Square pedestal tray

MAIN PURPOSE: Raise a square tray on a single pedestal for display or serving

A 150 mm square, round-cornered tray lifted 45 mm off the table on a single square pedestal with a wide foot, like a small cake stand. The pedestal pushes into the tray on a press-fit peg, so both parts print flat without supports.

Printing notes

82.9 cm³

Volume

102.8 g

Est. weight

1,376

Triangles

Both parts print flat with no supports. Push the pedestal peg up into the hole in the tray; a drop of glue makes it permanent. Prints as shown on its floor, no supports.

AR view Open in app

Preview of Hexagon two-tier screw-together stand

By Krypto

Complexity

Medium

Kitchen Serving & table

0

Hexagon two-tier screw-together stand

MAIN PURPOSE: Serve sweets, fruit or trinkets on two hexagon tiers that screw together

A two-tier stand of hexagon trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.

Printing notes

129.1 cm³

Volume

160.1 g

Est. weight

5,372

Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app

By Krypto

Complexity

Simple

Kitchen Serving & table

0

Hexagon pedestal tray

MAIN PURPOSE: Raise a hexagon tray on a single pedestal for display or serving

A 150 mm hexagon tray lifted 45 mm off the table on a single round pedestal with a wide foot, like a small cake stand. The pedestal pushes into the tray on a press-fit peg, so both parts print flat without supports.

Printing notes

78.8 cm³

Volume

97.7 g

Est. weight

620

Triangles

Both parts print flat with no supports. Push the pedestal peg up into the hole in the tray; a drop of glue makes it permanent. Prints as shown on its floor, no supports.

AR view Open in app

Preview of Octagon two-tier screw-together stand

By Krypto

Complexity

Medium

Kitchen Serving & table

0

Octagon two-tier screw-together stand

MAIN PURPOSE: Serve sweets, fruit or trinkets on two octagon tiers that screw together

A two-tier stand of octagon trays, 150 and 130 mm across, the top one held 30 mm above the bottom one on a slim screw-in column, on a single round pedestal with a wide foot. It comes apart flat for storage, and every part prints on its own without supports.

Printing notes

134.5 cm³

Volume

166.7 g

Est. weight

5,420

Triangles

Every part prints flat with no supports. Screw the column onto the stud in the bottom tray, screw the top tray on, and push the pedestal peg up into the bottom tray. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app