Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Squeeze bottle upside-down stand
By Krypto
Complexity
Medium
Kitchen Kitchen organisers
0
Squeeze bottle upside-down stand
MAIN PURPOSE: Stand sauce bottles upside down
Three bottles stand cap-down in the top plate, so ketchup and sauces are always at the nozzle.
Printing notes
86.8 cm³
Volume
107.6 g
Est. weight
2,820
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Tortilla keeper with lettered lid
By Krypto
Complexity
Multi-part assembly
Kitchen Food storage
0
Tortilla keeper with lettered lid
MAIN PURPOSE: Keep a stack of tortillas fresh
A round keeper for a stack of tortillas, with a friction-fit lid and TORTILLAS running around its edge.
Printing notes
289.8 cm³
Volume
359.3 g
Est. weight
5,664
Triangles

Prints as shown on its floor, no supports. The friction-fit lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

AR view Open in app
Preview of Toast-shaped sandwich box
By Krypto
Complexity
Multi-part assembly
Kitchen Food storage
0
Toast-shaped sandwich box
MAIN PURPOSE: Pack a sandwich for lunch
A lunch box shaped like a slice of bread, sized for a sandwich, with a telescoping lid.
Printing notes
132.5 cm³
Volume
164.3 g
Est. weight
1,880
Triangles

Prints as shown on its outline, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Salt pig with hooded opening
By Krypto
Complexity
Multi-part assembly
Kitchen Food storage
0
Salt pig with hooded opening
MAIN PURPOSE: Keep salt handy and dust-free
A salt pig with a hooded top that keeps dust out while leaving the front open for a pinch, and SALT on the side.
Printing notes
120.2 cm³
Volume
149.1 g
Est. weight
7,328
Triangles

Prints as shown on its floor, no supports. Print the hood upside down, roof on the plate.

AR view Open in app
Preview of Kitchen tablet stand with recipe ledge
By Krypto
Complexity
Simple
Kitchen Food preparation
0
Kitchen tablet stand with recipe ledge
MAIN PURPOSE: Prop up a tablet for recipes
A tablet or cookbook leans on the tall back while the low front lip holds it, with side cheeks and RECIPES engraved on the front.
Printing notes
150.1 cm³
Volume
186.1 g
Est. weight
5,232
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Spaghetti portion gauge
By Krypto
Complexity
Medium
Kitchen Food preparation
0
Spaghetti portion gauge
MAIN PURPOSE: Measure dry spaghetti by portion
A flat gauge with four holes that measure dry spaghetti for one to four servings, numbered underneath each hole.
Printing notes
40.6 cm³
Volume
50.4 g
Est. weight
4,348
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Teapot tea-bag rest
By Krypto
Complexity
Simple
Kitchen Coffee & tea
0
Teapot tea-bag rest
MAIN PURPOSE: Rest used tea bags and spoons
A little teapot-shaped dish for used tea bags and spoons.
Printing notes
16.9 cm³
Volume
21.0 g
Est. weight
1,016
Triangles

Prints as shown on its outline, no supports.

AR view Open in app
Preview of Waiter's corkscrew presentation case
By Krypto
Complexity
Multi-part assembly
Kitchen Serving & table
0
Waiter's corkscrew presentation case
MAIN PURPOSE: Protect and present a corkscrew
A slim case with a fitted recess for a waiter's corkscrew and a telescoping lid, shown open beside it.
Printing notes
190.8 cm³
Volume
236.6 g
Est. weight
5,392
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Oil bottle drip coaster
By Krypto
Complexity
Simple
Kitchen Serving & table
0
Oil bottle drip coaster
MAIN PURPOSE: Catch drips under an oil bottle
A coaster with an inner ring: the bottle stands in the middle and any drips run into the channel around it.
Printing notes
29.7 cm³
Volume
36.9 g
Est. weight
1,008
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Cupcake carrier for six
By Krypto
Complexity
Multi-part assembly
Kitchen Baking & sweets
0
Cupcake carrier for six
MAIN PURPOSE: Carry six cupcakes safely
Six cupcake bays in a carrier with a telescoping lid and bar handle.
Printing notes
375.6 cm³
Volume
465.7 g
Est. weight
4,956
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan