Keep salt handy and dust-free
A salt pig with a hooded top that keeps dust out while leaving the front open for a pinch, and SALT on the side.
Prints as shown on its floor, no supports. Print the hood upside down, roof on the plate.
Filament: at most about 149 g of PLA printed solid (roughly $2.98 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The salt pig with hooded opening model measures 110 × 110 × 100 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. Print the hood upside down, roof on the plate.
At most about 149 g of PLA (120 cm³ printed solid), roughly $2.98 of filament at $20 per kg. Normal infill uses less.
2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the salt pig with hooded opening model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.