Track how old leftovers are
A food box with the days of the week engraved along the front: snap a rubber band round it at the day you cooked, and everyone can see how old the leftovers are.
For food contact, print in a food-safe PETG and wash by hand.
Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
Filament: at most about 167 g of PLA printed solid (roughly $3.33 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The leftovers box with day marks model measures 180 × 120 × 60 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. For food contact, print in a food-safe PETG and wash by hand. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
At most about 167 g of PLA (134 cm³ printed solid), roughly $3.33 of filament at $20 per kg. Normal infill uses less.
2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the leftovers box with day marks model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.