Showcase

Models Showcase

Models shared by the SO3D.xyz community. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Towel Shackle
By Krypto
Complexity
Simple
Kitchen Kitchen organisers
0
Towel Shackle
MAIN PURPOSE: Keep a tea towel on the oven door
Snap the ring over the oven door bar and push a corner of the tea towel up through the slit into the round eye: the towel hangs where you need it, cannot slide off the bar onto the floor, and pulls free with one tug.
Printing notes
21.3 cm³
Volume
26.4 g
Est. weight
1,276
Triangles

Print it lying on its side (the profile flat on the bed) in PETG.

AR view Open in app
Preview of Interleaf Riser
By Krypto
Complexity
Simple (set)
Kitchen Kitchen organisers
0
Interleaf Riser
MAIN PURPOSE: Double cupboard space at an adjustable width
A cupboard shelf riser that expands: two identical risers, one turned round, slide their three fingers between each other so the pair spans 390 to 460 mm, then sits at whatever width fits the cupboard. Tins go on top, plates or jars underneath.
Printing notes
246.1 cm³
Volume
305.2 g
Est. weight
1,240
Triangles

Print two, upside down (top on the bed). Print it as shown, then turn it over so the floor becomes the top. Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Shukhov Base
By Krypto
Complexity
Simple
Kitchen Kitchen organisers
0
Shukhov Base
MAIN PURPOSE: Build a hyperboloid crock from straight skewers
The foot of a hyperboloid utensil crock. Stand bamboo skewers in every tooth gap round the rim and hold them with a rubber band, slip the Shukhov Collar over the top and twist it: the straight skewers lean into a waisted hyperboloid tower, the structure Shukhov used for his radio masts.
Printing notes
48.3 cm³
Volume
59.9 g
Est. weight
616
Triangles

Needs 30 cm bamboo skewers and two strong rubber bands. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Shukhov Collar
By Krypto
Complexity
Simple
Kitchen Kitchen organisers
0
Shukhov Collar
MAIN PURPOSE: Twist straight skewers into a hyperboloid waist
The twisting top ring of the Shukhov crock. The skewer tips sit in its tooth gaps under a second rubber band; turn it against the base and the cage pinches into a hyperboloid waist, turn it back and the skewers stand straight as a cylinder, so you choose the silhouette.
Printing notes
25.7 cm³
Volume
31.9 g
Est. weight
644
Triangles

Print in the same filament as the base. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Drawer-front peelings bag hook
By Krypto
Complexity
Simple (set)
Kitchen Kitchen organisers
0
Drawer-front peelings bag hook
MAIN PURPOSE: Hang a scraps bag under the chopping board
Hang a pair over the front of an open kitchen drawer and hook a carrier bag or caddy liner by its handles: peelings and trimmings go straight off the board edge into the bag, and the bag goes to the compost when you close the drawer. Print two.
Printing notes
9.7 cm³
Volume
12.1 g
Est. weight
988
Triangles

Print two in PETG; sized for 18 mm drawer fronts. Prints as shown on its outline, no supports.

AR view Open in app
Preview of Mixing bowl tilt ring
By Krypto
Complexity
Simple
Kitchen Kitchen organisers
0
Mixing bowl tilt ring
MAIN PURPOSE: Hold a mixing bowl steady at an angle
Set a mixing bowl in the grippy ring and lean it against the rim at any angle: the bowl stays put while you whisk or fold one-handed, and tilting it gathers the batter where the whisk can get at it.
Printing notes
160.2 cm³
Volume
198.7 g
Est. weight
840
Triangles

Print in TPU. Prints as shown on its floor, no supports.

AR view Open in app
Preview of Flour canister levelling bar
By Krypto
Complexity
Simple
Kitchen Kitchen organisers
0
Flour canister levelling bar
MAIN PURPOSE: Level measuring scoops over the canister
Hook the bar across the mouth of a flour canister or a rolled-down bag (rims about 137 mm apart) and drag each scoop along its straight edge: the measure is level every time and the excess falls back into the canister instead of onto the worktop.
Printing notes
7.1 cm³
Volume
8.8 g
Est. weight
236
Triangles

Food-safe PETG. Prints flat as a plate, no supports.

AR view Open in app
Preview of Kebab skewer case
By Krypto
Complexity
Multi-part assembly
Kitchen Kitchen organisers
0
Kebab skewer case
MAIN PURPOSE: Store flat metal skewers safely
A slim case for flat metal skewers up to 24 cm long, with a telescoping lid so the points never stab into a drawer or a picnic bag.
Printing notes
81.6 cm³
Volume
101.2 g
Est. weight
10,316
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app
Preview of Reusable bottle drying rack
By Krypto
Complexity
Medium
Kitchen Kitchen organisers
0
Reusable bottle drying rack
MAIN PURPOSE: Dry water bottles upside down
Stand up to three water bottles upside down to dry: each leans back in its own lane against a vented back wall, and the low front lip holds the drips.
Printing notes
182.8 cm³
Volume
226.6 g
Est. weight
4,542
Triangles

Prints as shown on its floor, no supports.

AR view Open in app
Preview of Mandoline blade safe
By Krypto
Complexity
Multi-part assembly
Kitchen Kitchen organisers
0
Mandoline blade safe
MAIN PURPOSE: Store mandoline blades safely on edge
Interchangeable mandoline and spiralizer blades stand on edge in six slots, so no edge touches another or your fingers; the telescoping lid and label slot keep the set together in a drawer.
Printing notes
219.7 cm³
Volume
272.4 g
Est. weight
5,040
Triangles

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan